Tree pruning hand saw

Contents

What Is A Pruning Saw – Learn When To Use Pruning Saws

Pruning garden plants makes them look more attractive, but it also can increase the health and productivity of flowering or fruiting shrubs. When it comes to doing the pruning work, you’ll get a better result if you use the optimal tool to accomplish each part of the job. One important gardening tool is called a pruning saw. If you’ve never used one, you may have lots of questions. What is a pruning saw? What are pruning saws used for? When to use pruning saws? Read on for all the information you need to get started using a pruning saw.

What is a Pruning Saw?

So exactly what is a pruning saw? Before you begin using a pruning saw, you’ll want to be able to find one in the toolbox. A pruning saw is a tool with the same sharp teeth as saws used for cutting lumber. But pruning saws are intended for trimming live shrubs and trees.

There are many types of

pruning saws, each intended for a particular type of branch or stem. All types of pruning saws should have hard-point, heat-treated teeth, but they come in different sizes and shapes. Using a pruning saw that matches the task at hand makes it easier to do a good job.

What are pruning saws used for? They are intended to help you trim larger shrubs and smaller tree branches. If you are wondering when to use pruning saws, here’s a good rule of thumb. If the branch or trunk you want to trim is under 1.5 inches (3.81 cm.) in diameter, consider a hand pruner. If the wood is that thick or thicker, it is prudent to use a pruning saw.

What are Different Types of Pruning Saws?

Pruning saws come is different sizes and types. Be sure you are using pruning saws that best match the job you are tackling.

For branches that are too thick for hand pruners, use a pruning limb saw. If the branch to be pruned is in a tight area, use a pruning limb saw with a shorter blade.

Select a finely-toothed, curved pruning saw for branches up to 2 ½ inches (6.35 cm.) in diameter. Try using a pruning saw with coarse teeth for heavier branches.

High branches require a special type of tool called a tree pruning pole saw. These tools usually have a pole as tall as the gardener using it. Expect a sawblade on one side and a curved blade on the other. The curved blade gets hooked over the branch to be trimmed.

If you need to carry a pruning saw for trimming a tree, select one that has a blade that folds into the handle. This makes it easier and safer to use when you are taking it up a ladder.

A Guide to Successful Pruning: Pruning Basics and Tools

Why Prune?

1) To improve the appearance or health of a plant. Prompt removal of diseased, damaged, or dead plant parts speeds the formation of callus tissue, and sometimes limits the spread of insects and disease. For trees, pruning a dense canopy permits better air circulation and sunlight penetration. To avoid future problems, remove crossing branches that rub or interfere with each other, and those that form narrow crotches.

2) To control the size of a plant. Pruning reduces the size of a plant so that it remains in better proportion with your landscape. Pruning can also decrease shade, prevent interference with utility lines, and allow better access for pest control.

3) To prevent personal injury or property damage. Remove dead or hazardously low limbs to make underlying areas safer. Corrective pruning also reduces wind resistance in trees. Prune shrubs with thorny branches back from walkways and other well-traveled areas. Have trained or certified arborists handle any pruning work in the crowns of large trees.

4) To train young plants. Train main scaffold branches (those that form the structure of the canopy) to produce stronger and more vigorous trees. You’ll find it easier to shape branches with hand pruners when a plant is young than to prune larger branches later. Pruning often begins with young plants for bonsai, topiary, espalier, or other types of special plant training.

5) To influence fruiting and flowering. Proper pruning of flower buds encourages early vegetative growth. You can also use selective pruning to stimulate flowering in some species, and to help produce larger (though fewer) fruits in others.

6) To rejuvenate old trees and shrubs. As trees and shrubs mature, their forms may become unattractive. Pruning can restore vigor, and enhance the appearance of these plants.

What tools are needed?

Use hand pruners to cut stems up to 3/4 inches in diameter. Two types of pruners are available: bypass and anvil. Bypass pruners have sharpened, curved, scissors-type blades that overlap. Anvil pruners have straight upper blades that cut against flat lower plates. Although anvil pruners are usually cheaper, they tend to crush stems as they cut. Furthermore, the width of the anvil can prevent you from reaching in to get a close cut on narrow-angled stems. Due to these drawbacks, bypass pruners are generally recommended.

Let me guess. Since you are reading this article right now, I bet you have dealt with woods throughout your life. Usually from an unwanted thick tree branch in your lawn that not even pruning shears and pruning loppers can take care of it. If so, you need a pruning saw. Let me tell you, you’ve come to the right place because in this article we’re going to cover how to choose the right pruning saw, and what are the best pruning saw products out there.

Image Product Name Price Rating
The Tabor Tool’s Pruner Saw $ A
Lanier Hand Pruning Saw $$ B
Corona RS 7265D Razor Tooth Folding Pruning Saw $$ A+
Planted Perfect Hand Pruning Saw $ A
The Gardener’s Friend Folding Pruning Saw $ B
EverSaw 8.0 Folding Hand Saw $$ A
Fiskars 14 Foot Power-Lever Extendable Tree Pruner (93016059J) $$$$ A+
Silky 270-33 Zubat Professional Hand Saw $$$$$ A+
Samurai Ichiban 13″ Curved Pruning Saw with Scabbard $$$$$ A+
Fiskars 7 Inch PowerTooth Folding Pruning Saw (93516935) $$ A

Our Pick for the Best Pruning Saw

Silky 270-33 Zubat Professional Hand Saw

A bit expensive, but it’s a great investment for the long term. The blade is amazing, it’s sharp, durable, and cuts think branches effortlessly. The grip is comfortable and feels safe. Silky 270-33 Zubat is truly the best option if you want the best of the best pruning saw.

Check the price on Amazon ›

Our Pick for Budget Pruning Saw

Corona RS 7265D Razor Tooth Folding Pruning Saw

Corona RS 7265D is the best pruning saw for the money. It has sharp blade, comfortable grip, and it feels durable. If you don’t prune too often and, therefore, don’t want to spend too much money, this saw is perfect for you.

Check the price on Amazon ›

Different Types of Pruning Saw

Pruning saw is a medium length saw blade usually curved or straight and attached to a handle. Pruning saws have sharp blades so that you can cut through large branches easily, the curvature will also make it easier. It’s mainly used for trees and tough thick bushes.

The most important thing to realize before buying a pruning saw is that not all prune saws are equal. They aren’t all made to do the same job.

To begin, first, you have to understand that there are different types of pruning saws. The main difference is the shape; each type has different blade curvature, and each type is best for specific kind of task. Here are the most common types of pruning saw:

1. Pole Pruner

As the name suggest, pole pruning saw is a saw attached to a long handheld pole that makes it easier to prune far or deeper branch. To make up for the reduced cutting power because of its length, pole pruners usually have a different kind of jaw. It’s much stronger. If you need a pole pruner, you have to consider the weight because it will be harder to hold a long and heavy pruning saw for a long time.

2. Handheld Pruning Saw

This is the most common type of saw used for easy jobs that are indoors or outdoors. A handheld pruning saw is versatile; it can be used for small branch and thick branch (although it’ll take a little longer to cut the branch). If you need a small, portable pruning saw that can be stored easily, this is the best option.

3. Straight Blade Pruning Saw

As you may have guessed, straight blade pruning saws have straight blades. Make no mistake, although the blades are straight, the handles are usually curved. Like a pistol grip, which makes it more comfortable. Straight blade pruning saws are best used for green wood and sap.

4. Curved Blade Pruning Saw

Curved blades, as opposed to straight blades, are best for heavy-duty cutting. The curve adds toughness in your cut that will make woods feel like bread. Curved blade pruning saws can also be used to cut smaller branch. However, cutting huge branches might be a little awkward with curved blades because our body isn’t used to the shape.

These are the most common pruning saws you will find while you’re browsing online or in the local store.

Best Pruning Saw — Reviews

Now that you know the difference between each type of pruning saw, let’s find out which are the best pruning saw for the money.

1. The Tabor Tool’s Pruner Saw

This pruner saw is sturdy and will definitely serve your for a long time. It can handle jobs that are off 4 inch of thickness due to its strength. It has a blade that is friction and rust resistant. The Tabor Tool is one of the best out there and is convenient for all types of usage whether for domestic uses or even heavy duty jobs.

What we like:

  • Affordable
  • Decent quality for its price
  • Great for household uses

What we don’t like:

  • Weak locking system
  • Grip not comfortable
  • It’s obvious that it’s cheap

Check the price on Amazon ›

2. Lanier Hand Pruning Saw

You can call this tool as a lazy tool as it will allow you to achieve the cutting with the least effort. It is ideal for any type of usage, whether cutting trees in your field or using it even in backpacking and camping trips. While not in use, you can fold it so it’s safe to store.

  • Affordable
  • Portable
  • Smooth cutting
  • Feels flimsy
  • Not durable

Check the price on Amazon ›

3. Corona RS 7265D Razor Tooth Folding Pruning Saw

Corona is one of the most known gardening suppliers out there who always knows what to bring to the table. Corona RS 7265D is available in 3 different sizes for the blade so you can find which one is suitable for your use. It is used generally for agriculture purposes and it saves you a lot of time on cutting. The blade can cut up to 10 inches diameter, more than most products within the same price range. The best part about Corona RS 7265D is that it’s really comfortable, the grip is so good you won’t even feel like you’ve worked a long time.

  • Affordable
  • Sharp blade
  • Grip feels comfortable
  • Great durability for its price
  • Able to cut very thick branches
  • Screws fall out easily
  • Flexing blade

Check the price on Amazon ›

4. Planted Perfect Hand Pruning Saw

Need an efficient tool for pruning trees or cutting bushes? This heavy-duty all-purpose saw is a good choice. Weighing only 8 ounces and measuring 8 x 1.5 x 1 inches, it is lightweight, portable and engineered for clean-cutting. It is ideal for lawn care, backpacking, camping and anything in between. It has a soft-textured easy-to-grip handle for comfortable usage. It comes with a blade that has 44 razor-sharp teeth that can easily cut through branches. The blade is replaceable with other types of blade. It is rust-resistant and easy to clean.

  • Good grip
  • Replaceable blade
  • Good locking mechanism
  • Fair price
  • Blade not too sharp, pruning takes a long time
  • Feels flimsy

Check the price on Amazon ›

5. The Gardener’s Friend Folding Pruning Saw

One of the cheapest and simplest pruning saws out there. This product is used for light use and can definitely finish the tasks. It is a household pruning saw that is safe whether while using or at stores. It is portable and can be held with you anywhere you go. It is also suitable for your kids if they need to use for their crafts. As stated from the name it is truly a gardener’s friend. The folding feature here also provides you with the safety while transportation or when storing.

  • Great for light jobs
  • Feels safe
  • Not for heavy use
  • Can’t be used on thick branches

Check the price on Amazon ›

6. EverSaw 8.0 Folding Hand Saw

This saw has a rugged 8″ blade with triple-cut razor teeth hardened to stay sharp which equals smooth and fast sawing. The best part about EverSay Folding Saw is that the handle is very comfortable compared to the other products. If you’re looking for a safe, strong, ergonomics, and durable hand folding pruning saw, EverSaw 8.0 is one of the best options.

  • Comfortable grip
  • Strong blade
  • Feels durable
  • Great for heavy work
  • Locking mechanism might break easily
  • Cutting takes forever

Check the price on Amazon ›

7. Fiskars 14 Foot Power-Lever Extendable Tree Pruner (93016059J)

The only pole pruner on this list. It’s much easier to choose a pole pruner than a hand pruner because, well, there aren’t just that many options and the winner is obvious: this one. The 14-foot pole makes it easier to reach and cut high branches. But what about the cutting power? Worry not, the power-lever technology increases the leverage and gives you up to two times more cutting power than other pruners.

  • Better than other pole pruning saws
  • Cuts well
  • Easily reach high branches
  • Sharp blade
  • Adjustable grip
  • A little awkward to use
  • The line gets tangled

Check the price on Amazon ›

8. Silky 270-33 Zubat Professional Hand Saw

This saw is more expensive than the ones mentioned previously. But for good reasons. Silky 270-33 is made for heavy-duty work. It can cut much, much thicker branch easily, quickly, and smoothly. It’s also extremely durable. The manufacturer gives you a lifetime warranty for any defects in material, that’s how confident they are with their product. It’s also worth mentioning that it is 100% made in the US.

  • Amazing for heavy work and thick branches
  • Well balanced and designed
  • Effortless cutting, smooth results
  • Great for elderly and people who lack strength
  • Better investment in the long term than cheap saws
  • Expensive
  • Plastic handle

Check the price on Amazon ›

9. Samurai Ichiban 13″ Curved Pruning Saw with Scabbard

The teeth are so sharp they will make you bleed with a single touch. Some people even compare this saw with a lightsaber. But don’t worry, it’s actually quite safe and comfortable to use. This saw, too, is more expensive than the ones mentioned previously. However, if you ever use this product, you will know that it’s worth it. If you personally don’t have much strength and want to cut thick branch, this is the perfect saw for you.

  • Comfortable grip
  • Strong, sharp blade
  • Effortless cutting, great for elderly and people who lack strength
  • Better investment in the long term than cheap saws
  • Expensive
  • Scabbard might break easily

Check the price on Amazon ›

10. Fiskars 7 Inch PowerTooth Folding Pruning Saw (93516935)

Another product by Fiskars, a well-known company in the industry with their quality products. Fiskars PowerTooth Folding Pruning Saw is a great middle between strong, durable saw that cuts easily and affordable. If you’re not comfortable purchasing unknown brand (despite the quality), you might want to choose this one instead. You won’t regret choosing Fiskars’ product.

  • Great for its price
  • Good blade
  • Great for small jobs
  • Gets the job done
  • Handle might break easily
  • Weak locking mechanism

Check the price on Amazon ›

Best Pruning Saws: Guide & Recommendations

WHAT’S THE RIGHT PRUNING SAW FOR YOU?

There’s a specialty saw for every type of pruning out there. Which one is right for you really depends on the application.

For many people, one general-purpose pruning saw will do the trick. But for some gardeners and DIY landscapers, it’s not enough to have just one type of saw that fits all applications. You might need several different types, particularly if your property has large shrubs and tall trees. For example, if you need to reach a branch that’s fifteen feet over your head you likely won’t use the same type of pruning saw as you would to remove stems from a shrub at ground level or cut up deadwood into smaller pieces.

To see our most highly rated pruning saws, just scroll to the end of this article.

TYPES OF PRUNING SAWS

Folding Hand Saws

There are a variety of folding saws available from different companies

Folding pruning saws are great when you want portability.

They come in a variety of different sizes to fit nearly any situation. The smallest I’ve seen is less than a foot long with the blade extended and is used for delicate pruning of bonsai trees. The largest one I’ve seen has a blade that borders on twenty inches and an overall length of twice that.

The real question is trying to match the size of the blade length to the largest limb or branch you realistically anticipate pruning. In my experience, the most practical blade length (not including the handle) is somewhere in the six to eight-inch range. I like this size because it fits in my pocket for easy portability but still lets me cut through pretty much anything I need to prune.

We tested several folding saws that fall within this range and you can see the reviews here (reviews coming soon!).

Non-Folding Pruning Saws

Most non-folding saws will need to be carried in a protective sleeve or carrying case, like this Corona with scabbard

Like folding hand saws, non-folding (straight blade with a handle at one end) saws have their place. They are typically longer than a folding saw, are more rigid (there is no tolerance or “play” between the handle and the blade like you typically find with a folding hand saw) and require some kind of carrying case or scabbard to keep the teeth away from you when not in use.

Non-folding saws come in many shapes and sizes. Choosing one comes down to what you think is the largest diameter branch you will be cutting. This will dictate the blade length (and blade design – curved or straight) and influence the overall length of the saw you decide to purchase.

Pole Saws

Fiskars Chain Drive Extendable Pole saw in use

A pole saw is basically a blade attached to either a fixed length or telescoping pole (instead of a handle). It is designed to reach high into a tree. These types of saws are best used without a ladder (get a longer pole if necessary) due to the tipping hazards of being on a ladder with a long (and sharp!) implement in your hands.

The pole saw blade can be replaced with one that has a hook on the end.

As with folding and non-folding hand saws, blades come in various lengths and designs depending upon the application. Virtually all are curved blades and some even have a hook on the end for pulling cut branches that get stuck in a tree.

Bow Saws

Stanley FATMAX Bow Saw

These are a completely different type of saw than hand or prune saws. They are typically used for “bucking-up” (cutting firewood), cutting larger limbs or cutting down a tree. The blade is stretched (tensioned) between the front and back of the saw. A handle at the back of the saw acts as both the grip and the blade tensioner.

Bow saws can have wooden or metal frames, although most modern bow saws have tubular metal frames with either plastic or metal handles.

BLADE MATERIAL TYPES & HARDENING PROCESS

This blade from ARS is impulse hardened, ensuring that it will be long-lasting

Blades these days are usually made from high carbon steel. Think of carbon as the stuff that makes steel hard. The more carbon in the steel, the harder it is. High carbon steel is the preferred material used in folding pruning saw blades because it is so hard and consequently stays sharp for a long time.

This steel is hardened (to keep it sharp longer) using either one of two processes.

  • Quench Hardening: This involves a process of heating the saw blade steel to a very high temperature and then dipping it into a bath of oil or water until it cools.
  • Impulse Hardening: It’s difficult to describe this so here’s how it’s described by ARS, a premium pruning saw manufacturer: “The process involves both heating and cooling the blade at very precise intervals (within thousandths of a second) using impact energy created by high-frequency currents.” The advantage of impulse hardening is that the teeth are 3x harder than quench hardening and last 3x longer – but you’ll pay a premium for this longevity.

Our tests showed that blades hardened through both technologies cut equally well when the saws are new. But over time the impulse hardened blade will generally win out – not because the teeth are any sharper than quench hardened teeth, but because they stay sharp longer due to the hardening process.

Note that high carbon steel is prone to rust when exposed to moisture, so some sort of coating or plating is a must-have.

Be aware that chrome plating eventually wears off, especially around the teeth. Keep this in mind when caring for your saw as high carbon steel without chrome plating (or a blade coating like the aforementioned Stanley Bow Saw blade) will rust if exposed to moisture.

If your saw blade does start to lose the chrome plating, a light coating of a lubricant along the blade and teeth is the best way to keep your saw free from rust. We recommend Tri-Flow.

CUTTING TEETH GEOMETRY – CUTTING DIRECTION

The teeth on the Fiskars Power Tooth Folding Hand Saw

Teeth geometry is critical if you want a fast and clean cut and a non-binding blade. Most saws these days have what is known as a triple ground tooth. This makes them not only extremely sharp but reduces the cutting time by one half, as compared to saws that have a double ground tooth.

Depending upon the geometry of the cutting teeth, the saw will cut on only the pull stroke, only the push stroke, or in both directions. From a human body mechanics standpoint, you can generate more power by pulling than pushing. Keep this in mind when selecting a saw for your different pruning tasks.

STRAIGHT VS CURVED CUTTING BLADES

Pruning saw blades come in two different shapes, straight or curved.

The blade on this ARS folding hand saw is straight

Straight blades are ideally designed for making cuts somewhere between your shoulders and your waist. The natural mechanics of your body make it much easier to use a straight blade in this body position. If you were to use a curved blade at that height, your arm would follow an unnatural up and down motion as the blade rides up one side of the branch and down the other.

It’s also difficult to keep all of the curved saw’s teeth in contact with the branch when using it at torso height; as you pull it toward you or push it away from you, the arched part of the blade will tend to lift off the branch. In contrast, a straight saw will stay in contact with the branch while sawing at a height between your shoulders and your waist.

Conversely, a curved bladed saw is used when sawing over your head or below your waist. The curved blade hooks or digs-in to the wood in this instance, and it’s easier for your body to pull a curved blade than a straight blade when sawing at these angles.

A curved blade, like this one on the Corona Razor Toothed Folding Pruning Saw, works better at lower angles or above your head

So what’s the right answer – should you get a curved or a straight blade if you only have the option of buying one saw?

It really depends where most of your cutting will take place relative to your arm position and your torso.

We strongly recommend that unless you’re a professional arborist (who’s hanging off a rope in the tree, is in a bucket truck, or is on a tied off ladder) you should stay OFF ladders while pruning/cutting. Too many accidents happen each year from having a ladder collapse or fall over while pruning.

If you’re on the ground and need to reach a limb/branch way above your head, then you’ll need a pole saw (either a fixed length pole or one that telescopes). In this situation, you’ll be cutting over your head, hence the need for a curved blade.

If you’re on the ground and reach for a branch over your head, a curved saw will give you a slight power stroke advantage, but a straight blade will work almost as well.

If you only have the budget for a single hand saw (I’m not talking about pole saws here – see above), then I would recommend a straight bladed saw. It gives you more pruning options that are easier on the body if you plan on using it mid-torso or over your head (at ground level) where you can have one hand on the branch being cut and one hand on the saw.

And as an added bonus, straight bladed pruning saws can also be used on DIY house projects like lopping off a 4 x 4 post when you’re building a fence, cutting a 2 x 4 when framing a wall, or slicing a notch in a piece of lumber. You get a “two-for” with a straight bladed saw.

CLEAN CUTS

As far as clean cuts go, you’re not going to know how cleanly it cuts until you try the saw or find an in-depth review. And clean cuts are somewhat subjective; what one considers a clean cut will not necessarily satisfy another.

A “clean” cut is one that doesn’t leave any ragged edges or torn bark when pruning a live tree or shrub. The quality of a cut is usually due to the quality and geometry of the saw’s cutting teeth.

If properly done, a clean cut will “callus” over better than a ragged one. Cleaner cuts are better for the health and vigor of a plant when it is trying to mend the area where the branch/limb was removed.

After testing a lot of pruning saws, it’s apparent that saw manufacturers produce different levels of cutting teeth quality. Most make clean cuts, but some blades and teeth sharpening geometries cut cleaner than others.

Corona folding hand saw in use

So how do you know which blades cut the cleanest? Educate yourself – read our reviews or those on other blogs, check out YouTube recommendations and see buyer’s verified reviews on e-commerce sites. Just make sure that the saw was actually tested. There are many websites out there that just assemble a list based on Amazon reviews without even picking up the tool…

And as an aside, I’ve found from personal testing of a large number of saws that it isn’t necessarily the most expensive saw that makes the cleanest cut.

BLADE SHARPENING

Can saw teeth be sharpened? The short answer is yes. Specialty files are made for this purpose.

But with the complex cutting teeth angles of today’s specialty pruning saws, I’d steer clear of trying to sharpen a blade yourself. The chances of properly sharpening a blade are slim to none, and one wrong move will ruin the blade.

If you can find a hardware store or arborist supply company, then consider having them sharpen the blade for you. Just consider that if your time is worth any money, then its frequently less expensive to buy a new saw than drive all the way to a saw sharpening place.

And as a final note, impulse hardened blades cannot be sharpened (even by someone who specializes in sharpening saw blade teeth). The steel is just too hard.

REPLACEMENT BLADES

These days, very few manufacturers offer replacement blades for fixed or folding pruning saws. Maybe it’s just the disposable society that we live in.

As an example, I recently reviewed nine folding pruning saws and only three offered replacement blades. In one case, the new saw cost $40.90 plus ($10.08 shipping) and the replacement blade cost $31.35 plus ($10.08 shipping), meaning that a new saw costs just $9.55 more than a new blade. In another case, it clearly made sense to replace the blade as the blade was reasonably priced in comparison to a whole new saw.

Ultimately, it’s about doing your homework before purchasing a saw and deciding if replacement blades are worth it to you or not. I will tell you that if you use your saw a lot, its cutting performance will eventually degrade, especially if you’re cutting a lot of deadwood. Also keep in mind that saw models go out of production, including replacement blades. This may influence your decision.

There is one exception to the above discussion and that is pole saw blades. Replacement blades for these are readily available. There is no need to replace the pole or blade retention head just because you need a new blade. Manufacturers of pole saw blades know this and manufacture replacements for this reason.

Pole pruner replacement blade

REPLACEMENT PARTS

Like replacement blades, replacement parts (nuts, bolts, screws, pins) are equally hard to find. There are very few companies that supply even a fraction of the parts necessary to rebuild your saw. Each year, fewer and fewer companies offer replacement parts. I guess it’s just easier for them to offer a new saw at nearly the same price as a rebuilt saw instead of providing an inventory of replacement parts.

FOLDING SAW BLADE LOCKING MECHANISMS

Of all the saws I’ve reviewed, I found three different types of blade locking mechanisms. The push button (Fiskars), the thumb lever (Corona, Gardener’s Supply, Centurion, Troy-Bilt, A.M. Leonard) and the swing lock (ARS).

Folding saw blade locking mechanisms. From top to bottom: the Fiskars button, Corona thumb lever, and ARS swing lock

My favorite is the swing lock by ARS. I found it the most secure of all the saws. But depending upon which saw you buy, you’re stuck with that manufacturer’s design. Don’t get me wrong, they all do the job, I just prefer one over the others.

Some of the saws lock the blade in both the open and closed position (Corona, Centurion, Fiskars, Troy-Bilt, A.M. Leonard). The rest (ARS, Gardener’s Supply) only lock the blade in the open position.

From a safety standpoint, the blade locking in both directions has some merit, but I did not find that the saws that locked in the open only configuration were any less safe. In my reviews, none of those saws unintentionally opened from the closed position, even without a lock to keep it close. That’s not to say it’s impossible, but I didn’t find it to be a problem.

If you’re concerned, then go with the folding pruning saw that locks in both directions.

HANDLES & GRIPS FOR HAND SAWS

Most hand saws offer a variety of grip styles.

Some, like the bow saw, usually have you gripping the wood frame or metal tube and blade-tensioning arm at the same time. Some of the more modern bow saws, such as the Stanley FATMAX below, have an additional handle on the side.

Stanley FATMAX bow saw handle

Non-folding and most folding hand saws are designed to be used with one hand and have a “hook” at the end of the handle to prevent your hand from slipping off the saw while in use.

The ARS Pocket Saw handle is curved for a better grip and to prevent slipping

Some saws still offer wooden grips (with a similar shape to the more commonly found composite based handles) and others have wooden grips like that seen on a carpenter’s saw.

With a pole saw, you’ll be holding onto either a fiberglass tube or round wooden shaft.

Non-slip grips help prevent your hand from slipping and give you better control over the saw. These grips come in a variety of materials, including a rubber-like compound, silicon-based material, grooves that are molded into plastic/composite handles, or just plain plastic-like contoured grips.

Being able to grip the handle of the saw with gloves on is important

The key is to find a grip that’s comfortable for you to hold. To do that, you’ll have to try out a few saws and/or read detailed reviews from people who’ve put the saw through its paces.

SAFETY CONSIDERATIONS

There are two must-haves while using any type of pruning saw (where you’re not sawing above your head. These are a pair of good sturdy gloves (preferably leather) and a pair of good-quality safety glasses (such as these from Wiley-X ).

Today’s teeth sharpening techniques make the blades extremely sharp. One slip without a pair of gloves can ruin your day.

Safety glasses prevent sawdust from falling in your eyes while cutting over your head/windy day, snapped branches from striking you in the eye, or a saw blade breaking and having a metal fragment launched into your eye.

Also, if you plan on pruning over your head where you can’t hold onto the branch with one hand while cutting it, then a hard hat is necessary. A falling branch from a pole saw cut way above your head without using a hard hat is a prescription for disaster.

WHERE DO WE GO FROM HERE?

Well, there are a few questions you might consider before purchasing a pruning saw:

  1. What’s your budget?
  2. How many times per week, month, year are you going to use it?
  3. Are there certain features that you like or must have?
  4. Does the brand play a big role in your purchase decision?
  5. Are there any features that you like or dislike?
  6. What’s the optimal blade length that will get 80% of the job done with 20% of the effort?
  7. Do you want a tool for life or will you buy a new one when the old one fails?
  8. Do aesthetics play into your decision?
  9. Do you place a lot of faith in reviews to help you make your buying decision?
  10. Do you have to touch and feel it in the (bricks and mortar) store before you buy it?
  11. Do you need more than one saw (since your property requires specialty saws for different pruning jobs)?
  12. Is the saw going to be used primarily to cut up deadwood into firewood or more manageable pieces?

IN SUMMARY

Finding the right saw for the right job may seem a little overwhelming, hence the questions above to help guide your decision-making process.

Personally, I believe in the adage that “you get what you pay for”. A really inexpensive, cheaply manufactured saw will not perform in the manner required. On the other hand, a quality tool that makes clean, precision cuts will not only make the job easier and more enjoyable, it will also benefit the tree/shrub through faster healing and a more vigorous plant (assuming the pruning cuts have been made properly).

There are a lot of manufacturers out there that make quality pruning saws. Now it’s time for you to make a decision and go out and have some fun.

Best Pruning Saws 2020 – Top Picks & Reviews

Last updated on: January 2, 2020

Pruning saws are one of the best tools for cleaning up your yard and feature a much lower cost of operation than electric or gas-powered tools. Despite how cheap they are to operate, they’re still underutilized. If you’re in the market for one of these economic and efficient tools, you’ve come to the right place. We’ve assembled a list of some of the best pruning saws of 2020 so that you can figure out which model is right for you.

We know it’s not always easy to shop online, so we’ve also created you a buyer’s guide to help you walk through some of the ideas that went into our reviews. If you know what you’re looking for in a pruning saw, you can get a model that will give you a long life of happy, easy service. Whether you’re an old pruning saw master brushing up before your next buy, or you’re a novice looking to tame your yard for the first time, read on to find out what you should be looking for when you go to buy your next pruning saw.

A Quick Comparison of our Favorites in 2020

Model Price Blade Length Editor Rating
SILKY Zubat 270-33
(Best Overall)
Check Price 13in 4.9/5
Fiskars Extendable 93016059J Check Price 15in 4.7/5
Corona RazorTOOTH Folding RS 7265D
(Best Value)
Check Price 10in 4.6/5
TABOR TOOLS T6 Check Price 8in 4.3/5
Corona Clipper Company RS 7510D Check Price 14in 4.2/5

10 Best Pruning Saws – Reviews:

1. SILKY Zubat Pruning Saw – Best Overall

The SILKY Zubat 270-33 is our pick for best pruning saw. It comes with an incredibly thin frame as just 1.5 millimeters thick, which means that it will make short work of most tree branches. It is also incredibly light, clocking in at just under two-thirds of a pound, including the handle. The blade is full-tang, which means it runs through the handle for the handle’s full length, which lowers the stress on the blade and will lead to a longer life.

Something that sets this model apart from others is the inclusion of a multiuse sheath, which can be easily worn on a belt and quickly taken off. It also comes limited lifetime warranty towards manufacturing defects, which displays their commitment to providing quality tools. This idea isn’t a knock against the tool so much as a warning: the Zubat is so good that it’s inspired a lot of inferior knockoffs. Make sure that you buy the real thing when shopping online, as it will provide you with a long life of productive, easy pruning.

Pros

  • Thin, lightweight blade
  • Full-tang blade
  • Multiuse sheath
  • Limited lifetime warranty

Cons

  • Plethora of knockoffs

2. Fiskars Extendable Pruning-Saw

The Fiskars Extendable Tree Pruner 93016059J is a combination lopper and pruner. It comes with a 15-inch pruning blade, but also comes with a lopper that can lop branches up to 1-1/8 inches thick. This design solves one of the biggest problems with pruners on expendable poles. Sometimes you’ll need to cut branches that are so thin that they bounce around when you try to cut them with a blade. Adding a lopper to this extendable pruner solves that problem, as you can just lop the thin branch instead of trying to cut it.

You can operate the lopper from the ground with an easy pull cord system, and despite all these extra features, this extendable lopper/pruner duo clocks in at less than seven pounds. The one downside to this model that keeps it out of first place is that it comes with a lower-quality blade than you’ll find on other pruning saws. That means cuts will take a bit longer to finish. Overall, this is a great lopper/pruner combination tool, and possibly the very best for you if you’re dealing with branches high off the ground.

Pros

  • Combination lopper and pruner
  • Extendable pole
  • Lightweight

Cons

  • Subpar blade

3. Corona RazorTOOTH Pruning Saw – Best Value

The Corona RazorTOOTH Folding RS 7265D is our choice for the best value pruning saw. If you buy this saw, you’re getting a tool that’s designed with both safety and power in mind. This model is hinged, which allows you to fold the blade back into the handle while it’s not in use, greatly reducing the chance of accidental injury while the saw is not in use. When folded out, the 3-sided razor teeth make short work of most tree branches and are even capable of cutting logs or branches 5” to 6” in diameter, which are too wide for most pruners.

The handle itself is ergonomically-designed, which means that it’s comfortable to hold and to use and won’t wear you out as quickly as a lesser handle. One potential flaw in this model is the folding hinge. If this tool breaks, that’s the likely place for it to do so. However, this is still a great pruner overall, and you can get this pruner for one of the lowest prices on this list, making it a steal. This is definitely one of the best folding pruning saws on the market.

Pros

  • Great handle
  • Foldable blade
  • Razer teeth

Cons

  • Weak pivot point

4. TABOR TOOLS T6 Pruning Saw

The TABOR TOOLS T6 is a great bargain tool. The best thing about it is certainly its price. It’s easily the cheapest entry on our list, and it holds up pretty well even though you might suspect that it won’t. Like with any saws, the best pruning saws are those that cut well, and the TABOR TOOLS T6 does just that. It also comes with an ergonomic handle, which makes it a pleasure to use.

In theory, the locking mechanism that keeps the tool in cutting position while you cut should keep the saw folded away when you’re not using it. However, the locking mechanism on this model isn’t designed to do that, and that means that there’s a good chance of the saw slipping out of the handle while it’s not in use, which is a safety concern. The handle, while it feels good to use, also feels cheap and plastic, so there are durability concerns. However, if you need a cheap pruning saw just to use once or twice, this is a great model for you.

Pros

  • Cheap
  • Non-slip grip

Cons

  • Durability
  • Doesn’t lock closed

5. Corona RazorTOOTH Pruning Saw

With an 18-inch blade, this RazorTOOTH pruning saw from Corona Clipper Company is great for cutting branches up to 10 inches in diameter. The handsaw-style ergonomic handle provides excellent leverage and a great grip for sawing through large branches. It is a bit pricier than other pruning saws, though it’s also larger than many of them as well. It doesn’t come with a blade sheath and it doesn’t fold, so you’ll have to be careful about where you store it.

On the whole, this saw just feels a bit cheap. The handle screws started coming loose partway through the first day of yard work. The points are very sharp, but it doesn’t cut as well as we had hoped. It made much better work of the larger branches than many of the other saws, but it just wasn’t enough to out-perform our top picks.

Pros

  • Long 18” blade
  • Hand-saw style handle

Cons

  • No blade sheath
  • Feels cheap
  • Handle screws came loose

6. EverSaw Folding Hand Pruning-Saw

With a rugged 8-inch blade that folds into the handle, this pruning saw from EverSaw is great for carrying in your pocket or tool belt. Backed by a lifetime warranty, it’s a rugged, multi-purpose saw that can cut bone, wood, plastic, and more. It is a bit higher-priced than some of its similar competitors, though the quality is about the same.

While it was comfortable to hold and folded into a nice package, cutting with it required more effort and time than with other saws. The teeth weren’t very deep, and they did tend to gum up with the wood after a few strokes. Although it’s a perfectly capable saw, other saws of equal or better value are available for the same price.

Pros

  • Blade folds into handle

Cons

  • Overpriced for what it is
  • Took more effort to cut

7. FLORA GUARD Folding Saw for Pruning

For many, the attractive thing about the FLORA GUARD folding hand saw is the very low price. More affordable than most of its closest competitors, it’s an easy temptation to fall into. While this saw functions just fine to start, it doesn’t have the longevity afforded by a higher-quality model.

It doesn’t feel too bad in the hand, but you can tell it’s cheap when you begin to make your first cuts. The blade is very thin, which means when applying pressure, it tends to bend. This is obviously not a desirable trait in a pruning saw, but you get what you pay for. After a few weeks, the screw holding the blade in fell out and the saw fell apart. If we had noticed earlier, it could have possibly been prevented. That said, it’s not a problem we experienced with the other saws.

Pros

  • Very low-priced

Cons

  • Blade is too thin
  • Poor longevity

8. TARVOL Pruning-Saw

With a 7-TPI blade that’s 14 inches long, this curved pruning saw is appropriate for branches up to 8 inches thick. The rubber-coated, pistol-style handle is pretty comfortable and worked well for us in testing. The longer blade is nice, though this one has more flex than we would like to see.

Unlike many similarly priced saws, this one includes a blade sheath. Unfortunately, the tip of the saw ended up going right through the end of the sheath, lodging the saw inside. In the process of removing it, the sheathe broke completely. This was a shame because we loved that it came with a sheathe in the first place. No injuries occurred, but in the struggle to remove the saw from the sheathe, they certainly could have. Although it’s a good saw, this major drawback is a safety hazard that keeps it from rising up the ranks of this list.

Pros

  • Longer 14” blade
  • Rubber-coated pistol-style handle

Cons

  • Too much blade flex
  • Blade went through sheath
  • Difficult to remove from sheath
  • Could be dangerous

9. DocaPole 6-24 Foot Pole Pruning-Saw

If you need to prune some branches that are way out of reach, a pruning saw with an extension pole may be the answer. This one from DocaPole is adjustable between 6 and 24 feet. With such reach, you may expect it to be very heavy, but with handle and saw together it only comes to about 5.5 pounds. It doesn’t feature the nice lever-action pruning attachment of the Fiskars in the second position of this list, although it’s considerably more expensive.

The saw can be detached to use by itself. It works just fine as any normal pruning saw would. When we attached it to the pole, we decided to see how high we could really cut. At lower heights around 10 feet, this saw had no problem. A little higher and we started noticing a lot of flex in the pole. Despite being advertised as a 24-foot pole, ours broke trying to saw while extended to 20 feet. It just snapped. Apparently, this problem isn’t all that uncommon. While it is usable for some of the lower branches, we can’t recommend it when better options exist.

Pros

  • Can saw branches 15’+ high

Cons

  • High price
  • Lots of flex around 15’
  • Broke trying to saw 20’

10. QiMH Pruning Hand Saw

This QiMH is a budget-priced product that offers the same level of quality. The price is great, which is what will draw most to this saw to begin with. It’s got a 7-inch steel blade that folds into the handle. The teeth are plenty sharp, but they just don’t perform very well when it comes to cutting.

The saw does feel a bit cheap since the handle is just plastic with no coating. The locking mechanism is the real weak point though. It jams and just doesn’t want to operate properly. Of the two we ordered, one showed up with the lock totally stuck and unusable. It’s hard to beat the price of this little folding saw, but the quality is nothing impressive. Spend a few more bucks and get one of the higher recommended options on this list.

Pros

  • Very low price

Cons

  • Locking mechanism jams and breaks
  • Doesn’t cut quickly
  • Just feels cheap

Buyer’s Guide

Build Quality

One of the most important things to consider when shopping for a pruning saw is the build quality. You can get a good pruning saw that will stay sharp and last a long time without breaking the bank, but you’re going to have to make sure that you get one from a reputable company and that has quality parts. That’s true for all tools, but pruning saws are one of those spaces that have a few great tools and a ton of subpar ones.

There are two things to look at that can give you an indication of how good the saw is, and neither of them are the blade. The first is the build quality of the handle. Is it made from cheap plastic or a more expensive plastic/rubber hybrid? If your handle breaks, the pruning saw becomes useless, so it’s worth it to pay a little more to get a pruning saw with a great handle.

Also, handles that have more than one connection point to the blade tend to last longer. If a blade is hinged, and only has that one connection spot, that’s a weak point that often causes breaks during normal use. Other blades are fastened in place with multiple fasteners and tend to last longer.

Blade

Something to watch out for in the blade is its thinness. 1.5 millimeters is probably the thinnest blade that you should consider purchasing. A blade can be that thin and still be well-made. However, once you start getting thinner than that, you should expect the quality to fall, and you greatly increase the risk of having the blade break during normal operations.

You’ll also want to pay attention to the number of teeth per inch. When it comes to saws the more teeth per inch, the slower the cut will go, but you’ll have a much more precise cut. More teeth means a faster but less precise cut.

You’ll also want to research the configuration and shape of the teeth. 3-sided razor teeth are the gold standard and should make short work of anything. Most pruning saws tend to be “Japanese-style,” or saws that cut on the pull stroke instead of on the push stroke-like Western saws.

Other features

Other things can come with a saw that can raise or lower its value. A high-quality sheath is one of those things that people don’t think about when buying a pruning saw, but that can improve the experience. Sheaths also tend to be a bit safer than the pruning saws that fold into their handles for storage, since there’s a lower chance that the blade comes loose at any point. It’s also nice to be able to hang your pruning saw from your belt while you’re not using it, which is something you can do with a sheath, but not with a foldable model.

Which pruning saw is right for you?

You still may not be sure which model is the right one for you, and that’s okay. Sometimes it can be a bit overwhelming to look at all of the available features and try to decide which model is right for you when there are so many options. Something you can do that makes this process easier is to figure out what your needs are and what your dream pruning experience would be.

Once you’ve figured that out, you’ll have a list of things that you’ll want to have on your next pruning saw. Find the saw that has most or all of those features, and not a lot of extras that you won’t use, and you’ll have found the saw that provides the best value for you.

Conclusion

The SILKY Zubat 270-33 is our top pruning saw, due to its thin and lightweight but strong frame and excellent sheath. The Fiskars Extendable Tree Pruner 93016059J combines a lopper and a pruner and works well enough to secure second place on our list. The Corona RazorTOOTH Folding RS 7265D provides the best value, coming with a great handle and foldable blade, at a price that won’t break the bank. The TABOR TOOLS T6 is an excellent bargain tool, good for those who don’t need a tool in the long-term. The Typhon East 14” Curved Japanese pruning saw is cheap, but ultimately doesn’t provide a good deal.

Hopefully, our reviews have helped you understand the world of pruning saws. While there are a lot of models to choose from, you should now be able to find the one that is right for you.

New from the blog:

  • Which electric pole saw tool is the winner of our tests?
  • 10-Inch vs 12-Inch Miter Saw: Which One’s Right for You?

The Best Hand Saws for Cutting Tree Branches

33shares

  • Pin
  • Share
  • Twitter
  • Flipboard
  • Email

You need a good saw for cutting tree branches and the right one will become an irreplaceable tool in your gardening kit. Safety, convenience, and the quality of your yard are all reasons to take this decision seriously. The right choice will last you years and spending some extra money now will pay off for seasons to come. This article will help you find the best option available for your needs.

When should you prune your trees? Of course, removing dead wood and light pruning tasks are possible at any time, but there are also seasonal considerations. Also, you should always remember that individual tree species can differ in what is most appropriate for them in terms of ideal pruning conditions.

Pruning in the Winter is most common as this results in more growth come Spring, so try to cut your tree branches in the Winter if this is your goal. Remember, however, that you should only do this after the coldest time of the year has passed. Other gardeners may choose to prune in the summer to correct problematic limbs as they are more visible during this time.

Autumn pruning is not generally recommended because decay fungi tend to spread more easily during this time of year, so keep that in mind. Make sure you know all about using pruning saws before you make your purchase, then you’re ready to go. Let’s look at some of the best pruning saws available on the market today.

Table of Contents

Comparison Table

IMAGE MODEL FEATURES
Corona RS 7265D Razor Tooth
  • 3 Sided Razor teeth for efficient cutting
  • Provides a comfortable grip for extended use.
  • Folding blade is curved, taper-ground, and replaceable.
View Product
EverSaw FOLDING HAND SAW
  • Lifetime Warranty
  • Triple-cut razor teeth
  • Gear style lock for safety.
View Product
Black & Decker PHS550B
  • Powerful 3.4 amp, 4,600 SPM motor
  • 6-foot cord
  • Cuts wood and metal
View Product
Fiskars 7 Inch PowerTooth
  • Razor-sharp, triple-ground teeth
  • 7-inch blade length
  • Non-slip grip
View Product
Silky 270-33 with Zubat Blade
  • New Professional Series Edition
  • Silky’s most popular curved pruning saw
  • Very light and flexible
View Product

The Best Saw for Cutting Tree Branches

Each of the saws on this list was selected for its reliability, price, and overall quality based on user reviews. You will see options of various sizes with different functions. We will cover each in detail so you can decide which will be best for you.

  1. Corona RS 7265D Razor Tooth
  2. EverSaw FOLDING HAND SAW
  3. Black & Decker PHS550B
  4. Fiskars 7 Inch PowerTooth
  5. Silky 270-33 with Zubat Blade

Corona RS 7265D Razor Tooth

If versatility in your tools is important to you, you will like this option. For a saw that will work in your yard on normal lumber, as a general tool, and for camping purposes, the Corona RS 7265D is a good choice.

The blade is 10 inches long and curved, easily slicing through foot-long limbs. In addition, the saw folds down for convenient portability. Certain types of wood are, of course, easier to cut through, but this blade works even with harder varieties.

“Initial impressions of the blade were good,” said Can Bike. “The teeth are hardened and the blade is curved for more efficient cutting. The curve design reduces friction and pinching of the branch onto the blade.”

A good saw will be useful for more than just pruning your trees. Do you live somewhere that has frequent storms and high winds? Then a tool like this can be very helpful for clearing your yard. It’s easier to carry than a chainsaw and will slice through many branches just as effectively, though some types of trees might require some extra elbow grease.

If you’re wondering whether this saw cuts on the push, pull, or both, it can work either way. The teeth look identical for both directions, but the curve and handle on the saw are designed for working best with the pull stroke. Whichever way you choose to use it, rest assured that the branch you were sawing will fall before you have much time to think about it.

The saw is extremely sharp, well-designed, and cuts effortlessly. This tool will hold up well to frequent use and comes in convenient and easy-to-open packaging instead of the difficult clam shell that many people fear. When this tool eventually gets worn out, you can use it as a root saw.

Check The Price

EverSaw FOLDING HAND SAW

For an 8-inch blade useful for hunting, camping, pruning trees, and as a great general addition to your toolbox, consider the EverSaw FOLDING HAND SAW.

This all-purpose tool comes with a solid grip and easily slices through plastic, wood, and even bone. Its superior design is built to reduce binding and friction.

You will get a fast, smooth sawing experience each time as the triple-cut razor teeth on the blade have been hardened for this purpose. The tool is useful for many different purposes and is both safe and easy to carry. It has an adjustable blade and a gear-style lock to keep it open while in use.

Its slip-resistant, ergonomic handle was crafted to be comfortable so you can use it for long periods of time without fatigue. This is a most welcome feature for those long days working out in the garden. The saw is simple to use, even for beginners, and doesn’t weigh much. This is perfect for use while up on a ladder when lopping shears aren’t a safe choice due to requiring two hands.

This will slice through branches between 6 and 8 inches thick in mere minutes without much effort. When it comes time to clean the blade, use a mild soap and water, then dry it off and apply WD40. This treatment will help your saw last much longer. Some users may wish to use a sheath with this knife as it can accidentally open when not in use otherwise.

Since the blade folds, it will stay sharper in your toolbox and this also makes it more portable for travel. Wonderfully sharp, the blade cuts just as it should, while being the right size for cutting down small branches. All in all, it will be a great addition to your existing landscaping toolbox.

Check The Price

Black & Decker PHS550B

For those who would rather have an electric saw than a manual pruning tool, the Black & Decker PHS550B is definitely worth thinking about. It comes with a 4,600 SPM motor and 3.4 amp, both of which let it cut through metal and wood easily. It has a 6-foot long cord, a tool-free feature for changing the blade, a lightweight and compact design, and a bag for storage when not in use.

“The Black & Decker PHS550B electric hand saw is extremely versatile and lightweight;” said the Chainsaw Journal, “capable of cutting small-to-medium tree branches for pruning, as well as cutting metal, plastic and of course, wood — including firewood.”

The saw comes with a limited 2-year warranty, metal cutting blade, and large capacity blade. It can slice through metal, plastic, and wood effortlessly and is easy to handle and control. The long cord helps make your outdoor pruning tasks easier and also enables indoor use.

The Black & Decker PHS550B will cut smaller trees easily, even those 5 or 6 inches thick. It will also work well for smaller branches. Note that some thought that the tool-less blade attachment arrangement was lacking and that the process is much easier if you use a screwdriver or wrench.

Check The Price

Fiskars 7 Inch PowerTooth

If you are experienced with gardening, you’ve already heard of Fiskars. Their Fiskars 7 Inch PowerTooth is one of their many premium-quality products and is also priced very affordably.

A lot of pruning saws stick out of your pocket and get in the way as you work outside. This saw, on the other hand, avoids that problem with its relatively small length.

The blade is triple-ground and razor-sharp, easily slicing through branches on your trees. The locking mechanism and grip of the knife are great, though some users found that the plastic handle wasn’t as durable as the rest of the knife. However, with this price point, that’s to be expected. If you plan to use this saw sparingly and want to save some money, it’s the perfect choice.

The handle is comfortable and built to fit securely in your hand, while the soft rubber insulates energy transfer to your hand. These features enable you to use the blade for hours at a time without soreness or fatigue.

The blade will fold into the handle and then lock to stay put, either out or in, offering both safety and stability. The teeth look like those in way bigger wood saws and the blade works best on “pull” strokes. Some might compare how it works to a mini version of the 2-man straight saw.

Not only is it perfectly suited for tree branches, but it may also be used to trim dying or dead fronts in your large bushes. It is easy to maneuver in the bush without compromising healthy branches or fronds. The saw is simple to use and light to handle. It’s great for use while hiking and camping, especially for collecting firewood for your small stove. The bright orange color of the tool will ensure that you don’t leave it behind.

Check The Price

Silky 270-33 with Zubat Blade

If you need a saw that is longer than 7 or 8 inches, consider the Silky 270-33. It’s a hard chrome-plated, heavy duty, professional saw that is taper-ground and resistant to rust. The blade is curved, which offers better cutting speed with less energy expended.

The razor sharp, precision-ground blade has four cutting angles, providing clean, fast, and smooth sawing action perfect for cutting big branches and other pruning tasks. The advanced blade comes with 6.5 teeth for every inch, will hold up well against tree resin, and can easily be wiped clean when needed.

Made in Japan, this saw has a handle made from molded rubber and comes with a pivoting, custom-fitted sheath and detaching belt holder. This blade is strong enough to cut through nearly any thickness in tree branches, excluding the trunk. For those who prefer to make a single purchase that will last a very long time, rather than having to buy the same tool over and over, this is a good choice.

When you use this tool, you will instantly notice that it was built to last. This knife is a top seller, and for good reason. This tool offers a mono-constructed blade and reliable sawing with minimal effort.

Check The Price

Three Tips for Tree Pruning Safety

There are many reasons to prune or trim your tree, including health reasons, safety reasons, and for aesthetic purposes. Pruning helps your trees maintain their general appearance and shape. It also prevents broken or dead limbs from falling off and harming anyone. In addition, branches and limbs can grow dangerously near to utility lines, creating the necessity to cut them back.

There are a lot of great tips for pruning that will help you stay safe and keep your trees healthy. When you have both the right tools and knowledge, you’ll be equipped with what you need to eliminate dangers and make your garden the best it can be. Let’s cover some basic safety tips you should keep in mind at all times:

  • Pick the Right Season: It’s always advisable to prune or trim your trees during the right time of year, which is usually when they are dormant. Although it’s possible to prune trees any time you want, the dormant season is best so you can eliminate fungi and other issues. You should also make sure that you never prune your trees when the weather is hazardous. You should also try to prune younger branches instead of older ones. This makes them easier to manage and also reduces the risk of nasty scars on the tree.
  • Notice Branch Size: When you are trimming your trees, branch size is something to always keep in mind. How big is the branch you want to remove? Very small branches aren’t a big concern, but when branches are 4 inches wide or wider, you should have a specific reason for removing them. You should only cut back branches that have narrow, V-shaped, weak angles and keep the branches that have U-shaped and stronger angles.
  • Safety Precautions: If you are cutting down larger branches, make sure you check the area for any potential damage. Use protective gear like a hard hat, safety glasses, and gloves if necessary. When you are cutting down an entire tree, figure out which direction it will fall and ensure that the area is clear of any objects. Before you use limbs or branches to climb, make sure they are stable. Never climb as you are holding a tool; instead have it attached to your belt or stowed in your pocket as you climb.

When you are aware of the safety basics of tree pruning and trimming, you can probably handle most of this work on your own and save money. Always stick with these general safety guidelines and have a helper with you when you can.

33shares

  • Pin
  • Share
  • Twitter
  • Flipboard
  • Email
  • Share
  • Tweet
  • Pin

106shares Note: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.

Saws have been in use for thousands of years, branching out to fill specific niches as the times, technology, and materials required. Today’s “complete” tool collection will include a variety of saws, from coping saws to hacksaws to any of a number of specialized table saws, and sometimes includes more than one saw of a given type.

There are many specialized cutting tools as well, but they are not commonly used outside of trades they were developed for. Additionally, you may be surprised to find that many saws are regionally called by the name of other saws.

In most cases, the shape of the saw plus the count and shape of the teeth will determine how a saw was intended to be used. Without further ado, here are 31 different types of saws, their uses, and pictures:

Table of Contents

Hand Saws

Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw.

No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim.

Back Saw

A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region.

(see our pick for best bow saw)

Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well.

Coping Saw

(see our pick for best coping saw)

With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers.

Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth. Traditional 2-man crosscut saws (aka felling saws) have a handle on each end and are meant to be used by two people to cut across (perpendicular) the grain of timber.

The more common 1-man crosscut saw is great for rough cutting lumber, trimming limbs or branches, and makes an excellent saw for camping or at the job site.

Fret Saw

Most closely resembling a coping saw, the fret saw has a long, thin blade for making intricate cuts. The fret saw has a longer, larger frame that allows cutting farther from the outer edges, but the blade cannot be rotated, which results in more tedious and difficult cutting positions when performing intricate scrollwork.

Hacksaw

(see our pick for best hacksaw)

Perfect for cutting pipes and tubing, the hacksaw is one of the most common saw types. They are lightweight and versatile, able to cut through wood, metal, plastic and other materials using material-specific cutting blades with a tooth count ranging from about 18 to 32 per inch.

Japanese Saw

(see our pick for best Japanese saw)

Built with a single handle and a protruding strong, thin cutting blade, this type of saw is more precise than a back saw and has the advantage of being able to reach places where other saws cannot reach.

These saws are available in three types (dozuki, ryoba, and kataba), and can be used to cut hard and soft woods with equal precision.

Keyhole Saw

Best described as a round handle with a single blade protruding from the top of the handle, a keyhole saw is used to rough cut circles or patterns.

Keyhole saws can be indispensable for drywall, especially when a small section needs to be removed and/or replaced, or where the interior of the wall prevents the use of powered tools.

Pole Saw

(see our pick for best pole saw)

Also referred to as a pole runner, this saw has an extendable pole, giving it a reach of 7 to 16 feet (or more), depending on the model. The cutting end is a six to eight inch pruning blade designed for pruning trees.

Many models of these saws are now powered, with a chainsaw-like end and using gas or electricity as a fuel source.

(see our pick for best pruning saw)

Pruning saws most often have a 13-15″ curved blade, protruding from a single “pistol grip” style handle. The blade is wide and has coarse teeth that are able to cut in both directions for faster material removal.

Pruning saws are more commonly found in a homeowner’s toolkit, but they are also widely used by tree surgeons, lawn services, and landscapers.

Rip Cut Saw

(see our pick for best rip cut saw)

Often referred to simply as a “hand saw,” the rip cut saw is a must-have for framing. It has relatively few teeth per inch, but each tooth is a sharpened point designed to remove wood. Anyone who works with wood will have one or more rip cut saws, usually of varying lengths.

Veneer Saw

Another highly specialized saw, the veneer saw is designed with a short double-edged blade that has about 13 teeth per inch. This saw is specifically used for precision veneer work, and the short blade prevents it being readily adapted to most other cutting tasks.

Wallboard Saw

Looking very similar to a keyhole saw, the wallboard saw generally has a shorter, wider blade and fewer teeth per inch and often comes in a double-edge variety. It is designed for puncturing through paneling or drywall, and is often used to create starter holes for powered tools.

Power Saws

Rather than simply duplicating various handheld saws, powered saws have evolved to fill niches of their own. For example, a radial arm saw expands on the capabilities of a miter saw and circular saw, but does not directly duplicate either.

Powered saws come in three primary categories: Continuous Band, Reciprocating Blade, and Circular Blade.

Band Saw (Stationary)

(see our pick for best band saw)

This tall, floor-standing saw uses large pulleys above and below the cutting table to move a continuous band with fine teeth to cut through most materials.

Band saws are perfect for intricate cutting of curves into wood, as well as cutting tubes, piping, and PVC, but are limited to a depth of only a few inches.

Resawing (cutting boards so they are thinner) is possible with a band saw by standing the board on its edge and carefully ripping it using a fence. Patience is definitely required for this task.

Band Saw (Portable)

(see our pick for best portable band saw)

A small portable version of the stationary unit, it can accomplish most of the same jobs as its big brother with the portability to be able to take to a jobsite or someone else’s garage.

You are of course more limited as to what you can cut (typically up to 3-4″ diameter pipes) and it takes more effort to make straight cuts, but it can be an invaluable tool especially for plumbers, welders, and metalworkers.

Chain Saw

(see our pick for best chainsaw)

As the name implies, a chainsaw uses a linked chain with numerous specially designed ripping teeth. While chainsaws are uniquely designed, they fall into the category of band saws.

Chainsaws are more commonly used in tree work than any other field, and may be essential to homeowners depending on your region.

Chop Saw

One of the largest portable versions of circular saws, the chop saw is manufactured in both metal and masonry cutting versions. The concrete cutting saw often includes a connection for a water line to reduce dust while cutting.

Both types of chop saws use toothless blades manufactured with special abrasives designed for the materials to be cut. Chop saws are also known as cut-off saws, concrete saws, and abrasive saws.

Circular Saw

(see our pick for best circular saw)

Sometimes referred to as a buzz saw or by the popular brand name of Skilsaw, circular saws use a toothed blade, typically between 7-¼ and 9 inches in diameter.

They are the most common type of powered saw, and accept blades that cut all types of wood, metal, plastic, masonry, and more.

Compound Miter Saw

(see our pick for best compound miter saw)

This is the miter saw on steroids. Compound saws are used to make straight, miter, and compound cuts. Instead of pivoting up and down the way a miter saws cuts, the blade is mounted on an arm that can be adjusted for complex angles, including cuts for complex scrollwork and trim.

The compound miter saw is one of the best time-savers when you need to trim out windows or add crown molding.

Flooring Saw

As the name implies, a flooring saw is a portable unit intended to re-saw flooring (hardwood, engineered, bamboo, or laminate) to fit. It’s a fairly specialized tool that in essence replaces a table saw, miter saw, and other accessories you may need to cut flooring.

The portability factor is its biggest advantage as you won’t have to spend a lot of time moving materials from garage to room and vice versa when putting in flooring.

Jigsaw

(see our pick for best jigsaw)

This handheld saw has a short, fine-toothed blade which moves up and down at variable speeds. This is one of the few saws which are designed specifically for cutting curves and other non-straight lines. Look for a jigsaw with a long cord or even a cordless option.

Miter Saw

One of the few saws designed to expressly mimic a hand saw, the miter saw is ideal for use in trim or other jobs involving precise measurements and angle cuts.

A simple miter saw can pivot up to 45 degrees to either side of a straight 90 degree cut, and can be used in conjunction with tables for cutting long mitered ends.

Oscillating Saw

(see our pick for best oscillating saw)

If Dr. Frankenstein was an engineer, he’d create the oscillating saw. Also known as an oscillating multi-tool or oscillating tool, it has a body that resembles a grinder, but has an oscillating attachment at the end that can be changed out depending on the job.

It’s often considered a more versatile sibling to the reciprocating saw, as it can handle not only cutting, but also grinding, removing grout or caulk, and scraping. At least one brand even offers sanding pads for their OMT.

Panel Saw

Available in either vertical or horizontal alignments, these relatives of the table saw are designed to cut large panels. The horizontal models use a sliding feed table while the vertical models either require you to feed the material or have a blade that moves through a stationary panel.

Panel saws are common in cabinetmaking, sign making, and similar industries.

Radial Arm Saw

By placing the motor and blade on an arm that extends over the cutting table, the radial arm saw allows you to make identical compound cuts, miter cuts, and more.

Depending on the manufacturer, radial arm saw blades may be interchangeable with circular saw blades, but verify the recommended speed of spin, as some radial saws turn very fast.

Reciprocating Saw

(see our pick for best reciprocating saw)

Like the jigsaw, this saw has a blade which moves back and forth very quickly. Reciprocating saws are sometimes called a Sawzall®, referring to the original manufacturer of this type of saw.

They are used for cutting tubing, wood, and plastics, and are also used for cutting beneath walls or wood joints because the blades can cut nails as well as wood. An invaluable tool for demolition work.

Rotary Saw

(see our pick for best rotary saw)

Rotary saws (or rotary tools) have a fixed blade and a small screwdriver-type handle. They are used for everything from crafts to construction, and are ideal for cutting into a wall for access or repairs.

Like the keyhole saw, a rotary saw is essential for drywall, panelling, and a myriad of other small cutting tasks.

Scroll Saw

(see our pick for best scroll saw)

Scroll saws can operate with a band or a continuous or a reciprocating blade. Similar to coping saws, these powered saws are designed for intricate scroll work, spiral lines, or patterns.

They have the added benefit of a table the material can be laid on while cutting to achieve precise rotation and detail. Creating curves with edges is what it excels at.

Table Saw

(see our pick for best table saw)

Table saw blades tend to be a little larger than for a circular saw, and consist of a high speed motor mounted beneath a flat table. To adjust the the depth of cut, the blades rises out of the table bed.

Table saws are great for making numerous rip cuts or preparing a large number of identical sized pieces. These saws accept metal and masonry blades, but take care that the blade design matches the motor rpm.

Tile Saw

(see our pick for best tile saw)

Similar in design to a miter saw, a tile saw (aka: wet saw) uses a diamond-coated blade and water cooling system to cut through tiles like butter. It’s used for cutting multiple ceramic or porcelain tiles to the desired shape or size quickly and uses a miter to ensure straight cuts along your cut marks.

Changing the blade will even allow you to cut glass on some models. Note that the reservoir beneath the table must be filled with water before using this tool.

Track Saw

Able to attach to a long gliding rail, the track saw (or plunging saw) is like a souped up blend of table and circular saw with added abilities. It more closely resembles the circular saw in appearance, making it more portable.

Simply line up the sticky-based track with your cut line (which you can see clearly through the track) and stick the saw on its rails. It’ll glide smoothly along the rail creating a perfect cut with almost zero effort.

  • 3 Best Compound Miter Saws to Simplify Complex Cuts
  • 2 Best Hand Saws (No Need to Consider Others)
  • 5 Best Coping Saws for Precise Cuts

Cutting down a tree or felling a tree can be an enormous job to handle depending on the size and condition of the tree so it’s important to err on the side of caution and use only the right tree cutting tools for the task.

Cutting down a tree is something that’s generally better left to the professionals to handle. This is mostly the case for large trees, trees that are near a structure, rotten trees, or if you simply feel uncomfortable tackling the job. If, however, you’re dealing with a small tree and you feel confident enough for the task, then this may be something you can do yourself.

Safety should be your utmost concern so it’s important that you use only the right tree cutting tools and follow safety recommendations. It will also be helpful to learn about the different tree-cutting techniques to make the job easier. And if it’s your first time to use a chainsaw, be sure to enlist the help of an experienced chainsaw user.

Chainsaw

A chainsaw is typically the first tool that most people think of when the topic of tree cutting is brought up. Using a chainsaw is the simplest and quickest way of cutting down a tree. Chainsaws are quite powerful and can cut through wood with relative ease. The power of these tools also means that you need to take care when operating them so as not to have an accident.

If you need to saw through logs, or if you have a small tree to fell, then owning a chainsaw will allow you to make short work of the task. A good chainsaw will be able to cut through wood without any problems, and you won’t have to worry about exerting yourself too much. As long as you are careful with this tool, it will be one of the simplest ways to take care of your tree cutting needs. People use chainsaws for all types of tree cutting purposes, including cutting down large branches.

It should also be noted that chainsaws come in several different styles. The most powerful chainsaws are always going to be gas-powered. These will be pretty noisy overall, and they don’t run cleanly like the other options. Electric-powered chainsaws lack a bit of the power when compared to gas-powered models, but they are quieter, and there are no fumes.

Which type of chainsaw is going to appeal to you the most will depend on your needs. If you have a lot of trees to cut down, then the increased power of a gas-powered chainsaw will be very beneficial. For most purposes, an electric-powered chainsaw is going to work just as well. You also won’t need to purchase fuel for the electric-powered chainsaws, and this adds to the overall convenience.

Pole Chainsaw

Get rid of nasty grime and smudges on your stainless steel Discover the best stainless steel cleaner to truly brighten up the stainless steel throughout your kitchen! SAVE 25% with coupon MYHAUS25

Pole chainsaws are excellent tools that will make cutting down tree branches a lot simpler. If you have tall trees that you want to be able to trim, then you will want to consider getting a pole chainsaw. No one wants to have to use a chainsaw while climbing a ladder if it isn’t absolutely necessary. When you need to cut down tree branches that are high up in the air, the reach of a pole chainsaw is going to make the job a lot easier than it would otherwise be.

Much like the chainsaw listed above, these types of tools come in different styles. You will be able to purchase gas-powered models and electric-powered models. As you would expect, the gas-powered models will be more powerful, and the electric-powered ones are cleaner. Either option should work great for your purposes, so it’s best to simply choose whatever option appeals to you the most.

The reach of these pole chainsaws is significant. Exactly how long a pole chainsaw will be will differ from model to model. The one being showcased here will allow you to reach up to 15 ft. That makes cutting down a high tree branch a lot simpler overall. You won’t have to feel like you’re putting yourself in a precarious position just to get the job done.

You can trim branches that are pretty thick with this powerful tool. Even branches that are 8-inches in diameter will not be a problem when you own this pole chainsaw. If you want to make trimming and cutting down tree branches simpler, then purchasing this tool is going to be very appealing. You’ll have an easy time using it, and you won’t have to worry about trying to balance on a ladder.

Pruning Shears

Pruning shears are among the most common tree cutting tools that people use every single day. A good set of pruning shears will make trimming tree branches simple. You can use these tools to trim your trees and keep them looking as nice as possible. You may not be able to trim branches that are too thick with these shears, but it is generally meant for pruning smaller limbs.

People who care about maintaining their property to the best of their abilities will want to own pruning shears. They’re a convenient tool to use when you’re trying to shape a tree to make it look aesthetically appealing. You’ll be able to use the pruning shears very easily, and it isn’t difficult to use them while up on a ladder, either. They will definitely prove to be useful to you if you have many trees on your property.

Of course, a lot of people use these shears on things other than trees. You will see people using pruning shears like this to trim their hedges and other things on their property. It’s a good tool to keep in your garden area because it will be handy for trimming a lot of plant-life. You can count on this tool to last you for a long time too, so it’s a worthy purchase.

Tree Loppers

Need to finance your home improvement project? Discover excellent financing options for your reno, furniture purchase or other financing need.

Tree loppers are kind of like the next step up from pruning shears. These tree loppers are capable of cutting branches that the pruning shears simply can’t handle. You can fit the branch that you are trying to cut in-between the powerful blades of these tree loppers. You then use your own power to cut it down and then move on to the next one.

It’s a simple concept that works very nice overall. Using these tree loppers is simple and very effective. When you need to cut down branches on your trees, the tree loppers will be the first tool that you turn to. As long as the tree branch isn’t incredibly thick, you should be able to cut it down with this tool. Thicker branches will need something like the chainsaw or pole chainsaw to make the process easier.

These tree loppers being shown here are capable of extending as well. This can be very useful for reaching branches that are a bit higher up. This way, you should be able to avoid climbing a ladder. Some people get nervous on ladders, so this option is going to be welcomed by many.

This is a comfortable tool to use, too. The grips on this set of tree loppers help you stay relaxed, even when you have been working for long hours. It won’t be uncomfortable to hold these tree loppers, so you’ll always have the best experience possible. Combine this with the overall durable build of the tool, and it is easy to see why this is a recommended option.

Long Reach Tree Pruner

🔥 TIP: !

Source: Amazon

A long reach tree pruner is going to be a good option to consider when you’re afraid of ladders. If you have trees with branches that are high up in the air, then you will need a reliable tool to trim them. If you aren’t willing to climb a ladder, then you need an option that will work for you. The long reach tree pruner is the optimal solution for trimming tall branches without having to put yourself at risk.

The overall reach of this tool is quite impressive. You can reach 7 ft into the air with this handy tool, making tall branches a lot less bothersome than they were before. Short people really enjoy having tools of this kind because it extends their reach and allows them to successfully cut and trim branches from the ground. It is truly a convenient tool to own, so you will want to consider it.

Another important quality of this tool is that it is extremely lightweight. People who are smaller will really appreciate that it is easy to hold. You won’t feel like it is cumbersome at any time during your trimming or cutting job. It’s a good tool that will always work well for you when you need it.

Pruning Saw

Need a landscaping service? Get a free estimate online from top local landscaping services in your area.

This pruning saw is going to be one of the most useful tools for you when you want to avoid using power tools. You can cut down even thick branches when you have a high-quality pruning saw of this kind. Most people do use these saws for general pruning purposes, but they can be used for cutting down large branches, as well. The teeth on the blade will make the job pretty easy overall, so you’ll be able to count on this tool to get the job done.

This particular pruning saw features a comfortable “D” grip. There is even a soft spot in the grip that makes it feel better on your hands, ensuring that you’ll have a smooth experience the entire time. You will have an easy time holding the saw and getting it into the right position to cut your branch. It’s easy to use and very effective overall.

Bow Saw

The bow saw is another common manual tree cutting tool. You can place the bow saw on the branch that you are trying to cut down, and then you should effectively rock it back and forth. This will cut through the tree branch, and you’ll have your job completed before you know it. These saws are very popular for their ease of use, and you don’t have to be incredibly strong just to get them to work properly.

The ergonomic handle really helps this tool to feel natural while you’re using it, too. You’ll be able to cut down large branches without it feeling too difficult. These saws are cost-effective, making them a great option for cleaning up your yard. You’ll be able to find saws like this at most hardware stores, too.

Chopping Ax

Another traditional tool that you think of for cutting down large trees is the ax. A chopping ax is going to help you to cut down even a large tree effectively. It can be quite a bit more work to do this than it would be using a chainsaw, but it can be preferable in some situations. When you want to cut down a tree manually, having a reliable chopping ax around will make a huge difference.

This ax is incredibly sharp, allowing it to cut through wood very smoothly. It will make very short work of smaller trees due to how sharp it is. Thicker trees will be able to be cut down effectively, as well. People use axes like this to cut down branches, too.

It also comes with a convenient sheath that you can place it in while it isn’t in use. This helps to keep you as safe as possible. It is a very sharp ax, so you will definitely want to take care while handling it. Storing it properly will keep this chopping ax working as a reliable tool for you for a very long time.

Hatchet

A hatchet is essentially a more portable version of the chopping ax that is highlighted above. You can use a hatchet to effectively cut tree limbs, and you can cut down small trees. It won’t be as good at cutting through larger trees as the chopping ax, but it is still a very handy tool to own. People take these hatchets with them on camping trips in order to chop wood.

One of the most convenient uses for a hatchet like this is splitting wood. If you like to make logs to use in a fire, then owning a hatchet like this is a very sensible choice. It can be good to have a hatchet like this around when you want something small to handle a smaller job. For larger tasks, you will want to turn to the aforementioned chopping ax.

Crosscut Saw

Crosscut saws are great because they will be able to help you cut down trees without having to exert yourself too hard. You can place this saw on a tree and simply rock the saw back and forth. This rocking motion is more about finesse than it is raw power. Cutting down trees with this tool is very convenient and is one of the best manual tree cutting options that you can consider.

The crosscut saw being shown off here is made to be very durable. You will be able to make use of it to cut down trees for many years. It weighs in at just under four pounds, but it is very rugged despite not being too heavy. You’ll be able to make use of this saw quite easily even if you aren’t a very large person.

Professionals use these saws fairly often when they are cutting down trees. It can be a very handy manual tool to own, so you’ll want to consider making use of one. If you purchase one of these crosscut saws, then you’ll be able to quickly fell any trees on your property without much of a problem. They may be a little pricey, but the convenience makes purchasing these saws a good choice.

Two-man Crosscut Saw

Two-man crosscut saws are also available for you to consider. You have probably seen movies or cartoons where two lumberjacks are working in tandem to saw down a tree. The saw that they were using would have been a two-man crosscut saw. This saw is used by two people to cut down a tree in a very quick fashion.

Two people rock the saw back and forth until the tree is completely cut down. You might be surprised by just how fast a tree can be felled when using a saw like this. Two people who know what they are doing with one of these saws will be able to use it quite effectively. It really isn’t that difficult to get used to the proper motion that you need to use for this saw either.

Similarly to the standard crosscut saw listed above, this saw can cost a fair amount of money to purchase. If you want to get tree cutting tools that are inexpensive, then you may wish to go with a different manual saw. If you have someone to help you cut down the trees, then buying a two-man crosscut saw could be really helpful. You’ll be able to get your job done a lot more quickly than you would have alone, and it’s pretty fun to use.

Cut-resistant Gloves

When you’re working with blades it is always good to take your safety seriously. You don’t want to have an accident and wind up hurting yourself. In order to keep yourself as safe as possible, it is highly recommended that you purchase a good pair of cut-resistant gloves. These gloves will keep you from accidentally cutting your hands while you’re working with various saws and power tools.

The gloves are actually really easy to work in, as well. You won’t feel like they are limiting the dexterity in your hands because they have been designed specifically for ease of use. You can stay safe while still being able to work effectively. This is the convenient way to avoid careless accidents and keep your job going smoothly.

The grip that you will have with these gloves is also excellent. You will never feel like your grip has been compromised due to wearing gloves. You can even still use touchscreen devices such as your phone while wearing these gloves. They’re a great option to consider if you need a good pair of protective gloves.

Chainsaw Helmet

Owning a chainsaw helmet is also highly recommended if you are going to be cutting down trees regularly. Cutting down trees and heavy branches will always come with certain risks. Being able to protect your head from potential falling tree limbs is important. A good helmet like this one is capable of withstanding an impact so that you can stay safe.

The helmet also comes with protective earmuffs that can keep your eyes safe from the loud noises of your chainsaw. Keeping your hearing safe is really important, and you don’t want to have to deal with hearing a loud chainsaw all day. These helmets come with ear protection for that reason, and you’ll love not having an obnoxious ringing in your ears when the workday is done. They feel comfortable to wear and won’t cause you any problems.

Helmets also come with protective visors. The visors are important because they help to keep debris out of your face. Chainsaws kick up a lot of sawdust and other debris when you are using them. You don’t want to get sawdust in your eyes and then have an accident, so purchasing this helmet is truly going to prove useful to you in the long run.

Chainsaw Chaps

Source: Amazon

Chainsaw chaps should be purchased for the same reason as the cut-resistant gloves. You want to ensure your overall safety while using dangerous tools such as a chainsaw. This may not be necessary if you are using manual tree cutting tools or just trimming your trees. If you are felling trees with a chainsaw, then having the right protection is going to be important.

Chainsaw chaps are made out of protective materials that can prevent you from cutting yourself if your chainsaw slips. These chaps will protect your legs in order to keep you from harm in the event of an unfortunate accident. You don’t want a chainsaw to make contact with your thigh even briefly, as it could nick an artery. This could be potentially tragic, so you can see why chainsaw chaps are so important.

Purchasing chainsaw chaps won’t cost you too much money overall. If you are going to be using a chainsaw on a regular basis, then it makes sense to purchase chaps that will keep you protected. They’re a worthwhile purchase, and you’ll feel more comfortable while wearing them. It’s important to take the necessary precautions, so make the purchase if the work you are doing calls for them.

Home Stratosphere is an award-winning home and garden online publication that’s a result of our talented researchers and writers who work directly with hundreds of professional interior designers, furniture designers, landscape designers and architects from around the world to create helpful, informative, entertaining and inspiring articles and design galleries.

Tags: Tools, Trees Categories: Gardens and Landscaping
1shares

  • Pin1
  • Share
  • Tweet
  • Email

It is presented with the curved blade which enables you to practice comfortable cuts with the complexity. Providing you with the satisfied cutting results, this saw is a required tool in your woodcutting saw collation.

Unique Features:

  • Ergonomics: As usual the hand saws are always light in weight and since they are cordless and no battery-powered saws they can be carried and used anywhere on your work sites.
  • Blades: With 1.8 mm thick blade, the length of the saw blade is 14-1/5″ allowing the user for comfortable cuts.
  • Cutting Capacity: With the perfect length and thickness of the blade, it enables you to make speedy cuts through the workpiece with extended strokes and elongated reach.
  • Convenience: The saw has an aluminum material covered with a rubber grip handle offering you a smooth and precise clasp for exact cuttings.
  • Adaptability: This hand saw can be utilized for small logs and long cuts in either of the personal or professional work area.

Pros Cons
  • It can be used as an alternative to a chainsaw to an extent.
  • The saw is of thin design which lets you hold the saw with grip.
  • It is a fabulous saw with lightweight and extremely sharp blades.
  • It can easily make cuts through long branches.
  • The saw is smooth, foldable and quite convenient to use.
  • This is an awsome pull stroke saw.
  • It is a razor-sharp and the long-lasting saw.
  • The saw is not a push stroke saw.

Final Verdict: It is among the best hand saws for cutting logs. The 14.2 ounces of the hand saw is the perfect buy for the outdoor practices. Focusing on the safety measures, presenting you a lever lock in the saw for your comfortable use.

With the proper understanding of the instructions, you can make easy and smooth cuts through the wood. The saw is of great use even for the hikers or trekkers who tend to carry a sharp tool along. The blades have the capacity of offering you 2 open locking points for in the sequence or haphazard cutting.

2. 16 inches WilFiks Pro Hand Saw

Amazingly designed, the WilFiks Hand saw fascinates many buyers with its high-productivity capacity. With the long razor-sharp 16″ toothed blades, the saw is capable of cutting multiple materials.

Whether you are a skilled, novice, gardener, house owner, or just a hobby soul; using the saw is not so simple; but no anxieties WilFiks has offered you with a beautiful saw to reduce all your sawing concerns.

  • Durability: The solid blade teeth are 5X long as compared to other regular teeth letting you perform sharp cutting practices and resulting with distinctive cuts.
  • Safety: The blade of the saw is extremely secured to handle the saw while cutting through harsh materials.
  • Handle grip: The handle is sophistically built concentrating on the tight grip and anti-glide comfort feature. Additionally, the handle of the saw is particularly designed for specific angle cuts.
  • About Blade: With the 9TPI Carbon steel blade, the saw ensures the flexible manageable cuttings. Plus, the saw has 3 cutting facades to accelerate the cutting pace up to double the normal hand saws.

Pros Cons
  • Perfect hand saw to maintain your lawn space.
  • It results in smooth and quick cuts or trims.
  • The saw has the ability to make depth cuts.
  • It results in high-productivity performance.
  • It can make cuts through the thickest of the tree.
  • The cutting blades are dynamic enough for accurate cuts.
  • The handle is smooth and holds a perfect grip.
  • This hand saw is thin and tiny but it is pretty sharp.
  • The tool is a great push and pulls saw.
  • The saw is thin, so if it is used roughly; the saw may wilt.

Final Verdict: With all the observations the 16 inches, a beautiful hand saw is perfectly designed focusing on the user’s comforts and ease to practice the saw. With the long-lasting feature of the saw and blade features, this handy tool is quite easy to use providing you with the instant precise cuts.

It has been concluded that since the saw is thin and small, the blades can take bents or break if this hand saw is used for rough cuttings of wood. Overall this is the best hand saw for firewood cutting purposes.

3. BACHO professional Timber Saw

The 24″ Timber saw has been specially introduced to cut the large trees. The BACHO Timber Saw is particularly intended for its maximum use in the professional area.

Having the capability of making deep, long and exact cuts; this saw has the characteristics to cut all the kinds of wood. With the perfect and sharp design, the small BACHO hand saw has adequate features to offer you.

  • About Saw: This saw is a 24″ long Timber hand saw allowing the user to comfortably hold the saw and perform the task.
  • Uses: BACHO professional saw is majorly used to make cuts through the Timber.
  • Blades: With the 3-1/2 toothed blade per inch, the blades of the saw are quite sharp enabling the accurate cuts.
  • Ergonomics: Free from errors the saw is lighter in weight and is easily maneuverable.

Pros Cons
  • The saw is extremely sharp moreover allowing you to make complex cuts.
  • The saw works perfectly and quickly when to make cuts through the logs.
  • It can be used as an alternative to chainsaw for small and simple cuts.
  • The size of the saw is quite manageable while cutting the trees.
  • It results in smooth and instant cuts.
  • The material of the saw is of quite good quality.
  • The saw is a solid design for comfortable use.
  • It has a perfect grip handle to hold precisely while performing cuts.
  • A perfect saw for cross-cutting.
  • Not a good choice for rip-cut.

Final Verdict: The 14.1 ounces of the professional Timber Hand saw of 24 inches long is the perfect buy for the seekers in search of a saw for professional purposes. With an advantage of resharpening of the blade teeth, the saw is long-lasting.

4. Gun-shaped SOG Foldable Hand Saw

The SOG foldable hand saw is also considered as the survival saw, is the classic portable saw. Whether you want to cut woods or trim, or you want a hand saw for your trekking or camping; this is the great choice one can opt for. With the high-standard quality, the saw has been introduced to you with the list of its characteristics.

  • About: The saw can be used for cutting branches, green-wood, and hard-wood with the quality of easy storage.
  • Multi-task: The saw has the capability to get used for a variety of tasks.
  • Ideally used to cut logs and branches, or to carry along for camping or outdoor activity; this saw can be totally reliable.
  • Blade quality and features: The blade of the saw is of carbon steel material with the coat of black powder to assure the saw is rust free.
  • Long-lasting: The SOG saws are sophisticatedly designed to live a long life.
  • Cutting efficiency: The sharp-toothed blades of the saw are capable enough to make quick cuts through the thickest of the branches.

Pros Cons
  • The saw is a slim designed attractive saw.
  • The best choice saw for camping purposes.
  • The blades of the saw are sharp enough.
  • Efficient saw for cutting branches and trimming.
  • A classic saw for this value.
  • Comprehensive saw with great durability.
  • Light in weight and portable enough.
  • The saw bends sometimes if implant a slight force.

Final Verdict: The 8.25 inches of the hand saw weighing about 5.9 ounces is the carbon steel material saw coated with the black powder to guard the saw from rust. It is the best buy for the campaigners and the ones who seek for making cuts in the lawns itself pruning and light wood cutting.

5. Multi-use Gunpla Pro Hand Saw

The Gunpla saws always show up in the set of 3 saws. With the 20″, 12″, and 6″ of the hand saw, backsaw, and the jab drywall saw respectively, these saws have the high capacity of the cutting power, allowing the user to practice the exact cuts according to the material and the cut type. With the three cutting facades, the saw gears up for speedy and high accurate cuts.

  • Specifications: The Saw set is delivered in three sets of items, 20″ for a hand saw, 12″ for backsaw furthermore the last and the small one of 6″ to hit drywall.
  • Multi-purpose: The saw is featured to cut through either of the materials of wood, plastic pipes, or drywall and is also used for multi-tasking too like pruning, woodcutting, lawn work.
  • Blades: The blades of the saw are designed with the manganese steel which enables the durability of the blades.
  • 20″ Hand saw: The handle of the saw is built with the PP plastic which is pretty convenient to hold the saw while cutting. It has the feature to mold the blades at 45 and 90 degrees of angle for quick and easy cuts.
  • 12″ Backsaw: Ideally practices accurate and finish cuts in hardwoods and plywood. The saw is sophistically designed for tenons, dovetails, and miter cuts. For long-lasting and more convenience, the saw is built with a bi-material handle.
  • 6″ jab drywall saw: With the pull and push strokes, the saw can cut double the speed of the other regular toothed saws.

Pros Cons
  • Good quality hand saw set.
  • Perfect buy for the carpentry work.
  • The saws are pretty long-lasting tools.
  • Great saws for trimming purposes.
  • Convenient handles.
  • Delivers accurate cuts.
  • Though the saw is rust-resistance coated, however, if not used well they might rust.

Final Verdict: The 3 pieces hand saws with the aluminum material weighing 2.45 pounds are of great use to the buyers seeking for carpentry work. Offering you with the accurate and the finished outcome, these saws have the ability to cut the various materials at high-speed as compared to the other toothed-saw.

6. 9.6 Ounces Coher Hand Saw

The multi-activity Coher Hand saw can be used for the variety of the cutting types. From camping to lawn cuttings and from gardening to the thick branch cuttings; the saw will make flawless cuts through all of them. With the 3 teeth razor cut blade, the saw is highly capable of making speed and accurate cuts.

  • Safety Portability: The saw is pretty easy to carry to your worksites since it has a plastic case provided to you which will ensure for the safe storage of the saw as well the safety of the user.
  • Ergonomic design: With the anti-grip smooth handle, the saw can be conveniently grasped and operated weel while cutting.
  • Multi-use: With the multi-use feature you can use the saw for the varied material cuts.
  • Accuracy: The razor-sharp 3 blade surface of the saw enables you to precisely cut the material.
  • Safety: The saw has the gear lock for itself so when folded it ensures that the sharp-toothed blades are well wrapped in the case.

Pros Cons
  • It delivers smooth, effective, and perfect cuts.
  • The foldable and the plastic case feature of the saw lets you store the saw comfortably.
  • The gear lock is up to the mark.
  • Best foldable handsaw to carry conveniently.
  • The steel blades of the saw are of good quality.
  • None.

Final verdict: With the 14.2 inches moreover with attractive design, the Japanese style pull cut hand saw ensures good outcomes with less cutting hard work. With the sturdy and smooth rubber grip handle, the saw enables you to firmly hold the saw while cutting.

7. Heavy-duty 13 inches Wilfiks Curved Hand Saw

Ideally constructed to prune, cut, and trim, the saw is quite convenient to hold for either of the large or the small-sized hand. The saw has the 5 times long cutting capacity than the regular toothed-blade saws. For comfortable variety cuts, this saw is the best choice you can opt for and can rely on the saw for the accurate cuts.

  • Layout: With pistol-design, the saw has the soft rubber grip handle to grasp the saw perfectly. The saw can make cuts through the push and the pull strokes quickly and specifically.
  • Durability: The solid-toothed blades of the saw enable you to make numerous of the complex cuts allowing the blade to cuts 5 times longer and practices instant cuts.
  • Cutting capacity: With the 3 tooth surface on the blades, the saw is pretty capable of making speedy and precise cuts.
  • Storage: The hanging clasp on the saw assists you to store the saw conveniently and safely.
  • Blades: With the high-quality screws, the saw can maintain the secure blade attachment with the handle even when used for the difficult cuts.

Pros Cons
  • The saw is perfectly quick to practice solid cuts.
  • The blade is extremely thin moreover allowing you to make fine cuts.
  • This is a pull stroke hand saw.
  • It is a good-looking design and is quite attractive.
  • The curve-shaped of the saw enables to manage the complex cuts.
  • With the razor-sharp blades, the saw has a fabulous cutting capacity.
  • It is used for multi-purpose.
  • None.

Final Verdict: This is the 14.4 ounces of the stainless steel Wilfiks 13 inches of the heavy-duty hand saw. Offering you with the varied features and functions; this saw is of great use for either of the skilled, novice, gardener, hiker, house owner or buyer who has the cutting hobby.

8. 12 inches Compass WilFiks Hand Saw

Specially designed for the harmonizing, tenant, and the miters cutting purposes, the saw has the capability to cuts within any of the material kind. With the sharp and perfect design, it draws a lot of buyers towards itself for providing quality cuts. With the 3 toothed surface blade quality, it is a perfect buy for sawing, pruning, gardening, cutting wood, and plastic pipes too.

  • Durability: With the diamond surface teethed blades, the saw can run additionally 5 times of the regular saw.
  • Ergonomic design: With the tight grasping function, the saw assures the perfect grip handles for you to hold the saw precisely. Furthermore, to maintain safety, the blades are secured with the extra secured blade attached to handle.
  • Cutting: Performing high productivity finished outcomes, the saw is capable of making twice the cuts as regular blades.
  • Easy-to-use: Since the hand saw is cordless, the how to use the method of this hand saw is pretty simple.

Pros Cons
  • It can easily cut shrubs in the tight quarters
  • The handle of the saw is flexible enough.
  • Easily make cuts through the thick branches.
  • Great cutting efficiency.
  • Perfectly easy-to-use.
  • Light in weight and hence easily portable.
  • The handle can tilt or break if the extra force applied.

Final Verdict: The 12 inches 6.4 ounces of the weighing hand saw is of great use in all the diverse cutting areas. Whether you are a novice or an experienced, you can easily use the saw without any interruptions. With the thick high carbon steel blade, the saw offers you a long-lasting life run and delivering you with accurate performance.

9. Electric-powered Black + Decker Hand Saw

With the 3.4 amp powerful 4600 SPM motor, The Black + Decker is the electric source hand saw. The 6-foot cord of the saw delivers high proficiency in cutting varied materials. Ideally designed to perform straight cuts, the saw is pretty manageable while operating. The saw can be used by house owners for lawn cutting purposes, professionals, novice, or a hobby person.

  • Efficiency: With the sturdy motor, the saw provides you with high and speedy cutting accuracy.
  • Multi-use: The blades of the saw are pretty capable of making cuts through either plastic, wood or any metal.
  • Ergonomics: The saw being an electric-powered saw is quite lighter in weight and is maneuverable.
  • Blades Swaps: Offering you the comfort of the tool-free blade switch method, the blades can be quickly exchanged as per your preferences of the material cuts.
  • Durability: With the high motor productivity life, a saw is a long-lasting tool with smooth use.

Pros Cons
  • The saw is considerably light in weight and quite convenient to transfer.
  • It is easy to understand and use.
  • It has the safety switch that turns the saw off when not in use.
  • The saw comes along with the storage bag which enables you to store the saw safely.
  • It has an easily accessible blade release button for an instant tool-free blade switch.
  • A perfect saw for tree pruning and large limbs cutting.
  • The blade locking pin is not fixed suitably.

Final Verdict: The 5.65 pounds, multicolor 120 volts electric-corded hand saw has a high cutting capacity with the diverse materials. The saw is flexible enough to perform indoor and outdoor practices. Being a lightweight hand saw, the tool is pretty manageable while working.

10. 11″ REXBETI Heavy-duty Folding Hand Saw

The rubber-coated handle ensuring the tight grip is the foldable heavy-duty saw with great pruning capacity. The saw is of the best use for the campaigners, dry woodcutters. With the standard quality razor-sharp blades, the saw delivers you the smooth cuts through thick branches.

  • Conveniency: With the long rubber handle, the tool allows you to hold the saw precisely and make perfect cuts.
  • Cutting efficiency: The triple-blade surface of the saw is razor-sharp, enabling you to make heavy-duty cuts through the varied materials.
  • Blade Description: The saw has 11 inches of the long extra blade for quick and convenient use.
  • Flexibility: The saw is capable enough to make either of the green or dry woodcuts as well as cutting trees and shrubs.
  • Long-lasting: The blades being constructed from SK-5 steel resulting in the quality blades that have the long-run potential for accurate cuts.

Pros Cons
  • Ensuring the safety measure the saw ensures the blades get perfectly covered while folding.
  • With the good-looking design, the saw works flaw and smooth.
  • The rubber handle and the thick blade is firm enough to handle rough cuts.
  • The blade lock tool is easy to manage.
  • The saw is flexible to cut through the thick branches easily.
  • The saw is excellent quality with this value.
  • Easy to use and the saw handle has a classic grip.
  • None.

Final Verdict: This is the best hand saw for log cutting additionally with the perfect tool for campaigns. With the long-lasting blade cutting accuracy, the REXBETI offers you the lifetime warranty for the saw. The dynamic toothed blades deliver you the exact and quick cuts.

CONCLUSION

This was all about the best hand saw for cutting logs. The above saws are all used for cutting logs purpose furthermore also can be used for another cutting purpose too. With all the work type or the cut types, you can relate your requirements with the above list of the hand saws and can choose wisely for which saw you can opt for.

Whether you are a skilled or a learner or a hobby soul, the hand saws are so easy to handle that even a novice can manage them. With the good cutting capacity, lightweight, and portability; this is the filtered hand saw list according to all the preferences of best hand saw for cutting logs.

ALSO, YOU CAN CHECK DIFFERENT TYPES OF SAWS FOR CUTTING WOOD.

1. BEST GAS CHAINSAW FOR THE MONEY

2. BEST POLE SAW FOR CUTTING LOGS

3. BEST SMALL GAS CHAINSAW

4. BEST TELESCOPIC TREE PRUNER

5. BEST BANDSAW FOR RESAWING

Leave a Reply

Your email address will not be published. Required fields are marked *