Soaker hose for garden

Here’s the deal on a soaker hose. They are a very efficient way to irrigate plants without wasting water.

What is a garden soaker hose exactly? The garden hose allows water to slowly seep out through tiny pores along the entire length of the rubber hose at a flow rate the ground and plants can absorb providing the right moisture content. The water goes right to the root zone with very low water pressure.

There is no runoff and compared to the overhead sprinkler method, and less water (aka saving water) is lost through evaporation.

What makes drip hoses an excellent watering solution in landscape and gardens beds?

The water is delivered low to the ground, close to the plant roots. This keeps the foliage dry, reducing the chances of fungal infection to the plants.

Drip irrigation systems are different from soaker hoses. A drip system uses flexible plastic drip hose tubing with tiny holes or emitters which drip or spray water slowly on the soil.

On the other hand, porous soaker hose watering irrigation is made to allow water to seep or to leak water all along the length of the hose.

Contents

Top Garden Hose Styles

Gilmour Flat Soaker Hose – The lightweight Gilmour hose is covered in an ultraviolet protective fabric providing for a durable long lasting performance and waste-free watering. The one downside – Gilmour recommends a 60 psi for best operation. Easy to move throughout the garden during the growing season. Removing the end cap makes it easy to drain before freezing weather.

Melnor Flat Soaker Hoses – Slowly soaks the area, for strong plant growth and minimum run-off. The flat roll design makes them easy to store in small spaces and available in 25, 50 and 75 feet lengths

Dramm Soaker Hose – Unique design and construction in 25 ft and 50 ft lengths provide thorough, deep watering while using 90% less water. Constructed of high-grade rubber, crush-proof, nickel-plated couplings with leak-proof connections.

Apex Soil Soaker Hose – Advanced vinyl construction, delivering flexibility, no crimps, tangles, clog resistant even under mulch for consistent soaking action. Available in a 25′, 50′, 75′ and 100′ lengths.

Image: source

What Are The Hoses Made From?

Soakers are made from 100% recycled materials, 70% from recycled rubber and 30% recycled polyethylene products.

They ensure that water is not wasted by helping deliver a steady, slow release of water right at the soil line allowing plant roots to gradually absorb the water.

If buried under mulch the hoses should last several seasons.

Farmers employee soaker hoses as well using what they call “drip tape.” The “drip tape” farmers use is thinner. This bulk soaker hose is only used for one growing season.

How To Use A Soaker Hose System In The Garden

So, how does a soaker hose work?

“Soakers” save time and save water by the gallon. Some of the items below are not necessary but help to make the irrigation process more efficient.

  • Soaker Hose
  • Pressure regulator
  • Mechanical Soaker Hose Timer
  • In-line water filter

Soaker drip hose weeping around a palm tree.

Once you have this garden hose drip system equipment the following steps should be followed for best results:

Lay out the drip garden hose in your vegetable garden bed to reach as many plants as possible. This may require making spirals around plants and trees. Hoses can be attached together, but don’t exceed 100 feet in length in any part of the garden.

Attach the pressure regulator where the hose connects to the water source. This helps keep water at a constant pressure consistently through the length of the hose.

Attach the soaker/drip hose to the pressure regulator and turn on the water. Check whether everything is working as required and the soaker hose is thoroughly wet.

Water should be seeping out through the small holes and not squirting in the air.

Turn off the water and place the soaker hoses “more permanently” in the selected location. They work efficiently when buried under mulch. DO NOT BURY under soil.

Turn on the water. Around 2 inches of water in a week will work for most plants unless it is extremely hot or the soil is very sandy.

How much water does a soaker house per hour?

How long to run soaker hose to deliver 2 inches of water?

Using 5/8′ inch hose you can approximate the following delivery rates:

  • 200 minutes delivers 1″- inch of water
  • 150 minutes delivers 3/4″- inch of water
  • 100 minutes delivers 1/2″- inch of water
  • 50 minutes delivers 1/4″- inch of water

Once you’ve figured out your delivery rate, use a timer at the outdoor faucet to turn the water off. Otherwise, you’ll need to manually turn the drip hose off and on.

Place a container under a section of the soaker hose and turn on the hose to measure the amount of time it will take to fill two inches of water.

Remove the end of the hose from the spigot and attach the mechanical timer. Set the timer for the amount of time that was calculated to fill two inches.

Things To Consider When Using Drip Hoses

Use Them In The Right Location – Soaker hoses work best in vegetable garden beds. For lawn watering, sprinklers work best, while for steep slopes drip tubing is the way to go.

Start At The Faucet – A back-flow preventer should be attached to the faucet first unless you have one that has a built-in prevention device.

Connect the timer to the water source to deliver just the right amount of water every time. Add a pressure regulator which to keep water pressure at 10 psi before attaching the hose. Another option is to connect an elevated rain barrel with a soaker hose attached and allow everything to be gravity feed.

Too Long Is Wrong – For soaker hoses to perform optimally they should have a maximum length of 100 feet. Make sure to purchase the length that fits your garden. Use a garden hose to connect the soaker hose to the faucet.

Keep The Hose At The Right Level – Soaker hoses deliver water most uniformly on level ground. Water does not seep out effectively on vertical positions such as rockeries or slopes.

If the level beds are at different heights, snake the hose through the beds. Use solid garden hoses to connect soaker lengths together to form a continuous line that is no longer than 100 feet long.

Use Correct Spacing – In sandy soil the hose lines should be 12-18 inches apart and 18-24 inches apart for loam or clay soil.

Hoses should be set at 1-2 inches from the base of established plants. New plants or annuals should be placed closer.

Slow Down The Water Flow – Turn the faucet on to allow just enough water to run through the hose to ensure it seeps and not spray. Amounts may vary from one faucet to another. Try turning a quarter turn and adjust up or down as needed.

Ensure Perfect Timing – Try running the soaker for 30 minutes twice a week in landscape beds. For vegetables and annuals, they may need watering daily.

After watering, check whether the moisture has penetrated several inches (about 2”) and adjust accordingly.

Keep in mind that too much water can cause plant health issues just as too little water can.

More Soaker Hose Tips For Perfect Water Delivery

Kink Free Hose – Always ensure that the hose is kink free as this will block water flow. Uncoil the soaker hose and allow it to “lay out” before installing it in the garden bed.

Mesh Water Filters – Use 150-200 mesh filters to keep particles from clogging hose lines. There are two types of filters, the T, and the Y filter.

The T filter is used for small systems and they feed water in a 90° degree turn. Y filters are larger are large with water traveling straight through them. NOTE: Well water has more particles in suspension.

Flush Lines – Flush hose lines when first installed and several times throughout the season. Remove the end cap and allow water to flow through to remove debris.

Cover Hose – Cover soaker hoses with 2″-3″ inches of mulch. It helps retain moisture and protects the hose from sun damage.

Do not bury it in the soil and always move it before digging the garden. (Some experts recommend burying with soil – you choose!)

Outdoor Faucets Are Temporary Connections – Turn water off and disconnect hoses between uses for water quality protection. Make sure to cap open end!

Made With A Variety Of Materials – Soaker hoses are flexible to use and arrange to fit any garden layout and they are available in several different grades:

Plastic or vinyl hoses – An affordable option, lower quality, and price. Easily affected by exposure to heat and split easily.

Fibrous Hoses – Made of sturdy porous rubber and long-lasting. Tolerates being buried under mulch.

Using A Soaker Hose For Drip Irrigation Hoses On Patio Container Garden

Anytime is a good time to look for ways to make your plant watering and your irrigation system more efficient. Drip puts the water right where plants need it… at the roots.

As we shared above drip can be used in the garden but there are many other applications, landscape beds, container gardens (dry out quickly, especially up on a roof), deck and patios, hanging baskets and commercially in nurseries and groves.

Think drip isn’t for you? Think again! In this video, the people at GardenFork.TV in New York, show how they setup a drip irrigation system using a soaker hose on their rooftop patio garden.

GardenFork.TV shares this drip irrigation automatic watering system is great for a green roof, deck, balcony container gardens. Container gardens dry out quickly, especially up on a roof, so you will need to use an automatic watering timer with this soaker hose drip irrigation system.

Summary

If you have garden beds or garden beds or grow in raised beds soaker hoses are a great, efficient solution to water plants and not waste water. No runoff, less water lost through evaporation. And plants get the water delivered to them right at the roots.

how long to run soaker hose? – Experts recommend using it for 30 minutes on an average. This is found to be the ideal time for most of the scenarios. Naturally, if you find out that it isn’t working well for you, you might adjust with a plus or minus of ten minutes, and that would pretty much work for almost every scenario.

Table of Contents

Perfect You’re soaker hose Timing

Start running your soaker hose about 30 minutes twice a week. After a watering day, check your soil to see if the moisture has penetrated several inches, then adjust accordingly. When you find the magic number for your conditions, use a timer to water the same number of minutes every time.

How long should my system run to provide adequate watering with soaker hose?

Every system will be different based on the area where you live, the size of the soaker hose you are using, the type of soil you have, and what you are planning to grow. warmer weather will cause

water evaporation (option: cover it with mulch). The sort of soil can be analyzed by holding a handful of soil and press it. If the soil sticks tightly together and forms shapes, it is clay. If the soil holds together but easily breaks apart, it’s loam and if it breaks into tiny grains, its sand. These soil textures soak up water differently: in clay, the water expands the far outside and then down, with sand water spreads least outside and farther down, and in the loamy soils, you have most consistent outside and under.

Helpful tip: A gardener’s professional trick for adequate watering. Insert a wooden dowel to reach the root area, and then water, based on the facts above.. Once watering is completed, pull the dowel from the soil and check, if the dowel has water sat.

In winter I use the soaker only when rainfall is insufficient. I stick my finger in the soil. If it’s dry down there, I water usually for 30 minutes.

which timer best for soaker hose?

Don’t forget to set the timer: You need to give the plants the right amount of water. You might let the water run for too long and overwater the plants otherwise. So, you need to diligently set the timer so that the plants get adequate water- at the right time.

I had problems with many manual timers, there was not enough water flow to make them work correctly, so I changed to electronic timers. The newest ones are quite easy to program, and not expensive.

Remember: The goal should always be to keep your soil moist, not soaked or bone dry. And the best way to avoid those types of problems it’s by water timers. Here is a nice digital timer with a moisture sensor which will keep the water from running if it has been watered!

I know he does not have many reviews
But from my experience, he worked excellent for me with a soaker hose!

recycle soaker hose

Soaker hoses are black and pretty rough on the cover because they are usually made from recycled car tires. Water seeps out from pores along the entire length of the hose, drip by drip. It waters the soil slowly to prevent run-off. There is very little evaporation into the air. The water seeps into the soil and covers the area out 8-12 inches from the hose depending on the type of soil you have.

how long to run soaker hose Conclusion

My recommendation is to add a soaker hose to every new garden, putting it in place before the mulch goes down. Then connect it to a timer, this way, you do not have to remember to close the hose off. In various situations, I prefer a soaker hose better than drip systems that are more temporary. It is easy to move them or configure as the garden grows and the plants are added or transferred. Even though you can leave the soaker in place through the winter, I prefer to take it out in the fall, because this way it’s easier to clean the garden.

I invite you to follow me on Pinterest.

home gardening blog.

to my special category, 50% -90% discount on gardening products.

sources

How to Setup and Install a Soaker Hose for Your Garden

Do you hand-water your yard in the summer? Have you ever wondered if there is a better way to enjoy a beautiful, lush yard without spending back-breaking hours working through the blistering heat of summer? While a flower garden irrigation system might seem like a huge investment, a soaker hose allows you to achieve many of the same benefits for a fraction of the cost.

Using a soaker hose around your yard will save you water, time and even money.

Learn everything you need to know about soaker hoses: what they are, how to install them, where to put them how to use them on specific plants and all the benefits they have to offer.

What Are Soaker Hoses?

A soaker hose is exactly what it sounds like – a hose that soaks the area around it. Unlike a traditional hose, soaker hoses are porous, so water can gently seep out along the entire length of the hose. Their efficiency is undeniable, as they deliver moisture straight to a plant’s base, without wasting a drop of water in the process.

Regular, pour-over watering can result in water evaporating or running off before it reaches a plant’s thirsty roots. Some studies have shown that a soaker hose can use anywhere from 30 to 50 percent less water!

How to Install Your Soaker Hose

Installing a soaker hose is simple – just follow these 6 steps:

  1. If your soaker hose is brand new, unwind it and leave it in the warm sun for an hour or so. This will loosen the tight coil the hose has been wound in, making placement much easier.
  2. Remove the end cap and hook the soaker hose up to a water source.
  3. Run water for several minutes to flush the hose. It’s best to flush new hoses before using them and again one or two times each year to remove any debris that has built up.
  4. Replace the end cap.
  5. If the garden area to be watered is close to a faucet, the soaker hose can be connected directly to the spout. However, if more length is needed before the soaker hose will reach the area it will water, a regular garden hose can be connected to the main water source first. Then the soaker hose can be connected from the far end of the garden hose.
  6. Stretch the hose out and turn the water on, adjusting the pressure until you see a slow but steady drip.

Where to Place Your Soaker Hose

With some thoughtful planning you can lay a soaker hose to perfectly water your garden or flower bed.

  • For flowers, vegetables or shrubs planted in a line, lay the hose straight along the rows. If they are not planted in a straight line, snake the hose in and out around each plant.
  • For established plants, hoses should lay about 2 inches from plant stems. For new plants or annuals, closer spacing is suggested, since their roots are shallower.
  • Make extra loops around any plants that need more water.
  • If you have sandy soil, your hose should wind about 1 foot apart from itself in each row or section.
  • For clay or loamy soil, space your hose about 2 feet apart.
  • Secure hoses in place with garden pins to keep them from shifting.
  • Cover soaker hoses with 2 – 3 inches of mulch (not soil) to reduce the amount of moisture lost to evaporation and to protect the hose from sun damage.

Using Soaker Hoses on Various Plant Types

  • Bushes and shrubs – Run hoses along the base of each bush or shrub, spacing appropriately according to your soil type.
  • Flower beds – Even if you don’t have long, straight rows of flowers, just wind the hose through each plant, keeping it positioned about 2 inches from the stem.
  • Containers – Flowers that are contained in raised beds or pots can still take advantage of the convenience a soaker hose has to offer; just wind the hose through the space as you would any other time, paying attention to specifications already noted here regarding soil and plant type.

Connecting Soaker Hoses to Extend the Length

If you are watering a larger flower garden or landscaped area, you may need more than one soaker hose. Keep in mind that while you can connect multiple hoses, the hose closest to the water source will output the most water. The very end of multiple hoses will get much less water, resulting in uneven water distribution that could affect how well plants in those areas grow. Combat this problem easily by setting up “zones” in your yard.

Using Zones: Imagine your yard is divided into zones. Dedicate individual stretches of hose that are no more than 100 – 150 feet for each zone. Use a hose splitter with a shut-off valve to easily switch flow from one hose to the other, distributing water evenly throughout your entire flower garden or yard.

Benefits of Using a Soaker Hose

  • Water conservation – Soaker hoses have a slow, steady drip that ensures little to no water is wasted to evaporation or surface runoff. Water goes straight to your plants.
  • Prevent overwatering – Soaker hoses make it easy to ensure you are giving your yard the exact amount of water it needs, every time, without risking overwatering.
  • Prevent weeds – By only watering the plants you are trying to grow, you are not watering unsightly weeds that you’ll just have to pull later in the season. Water is going straight to the plant, without excess runoff, therefore, the surface soil around the plants stays drier. Weeds won’t get the water they desperately need, and weed seeds won’t sprout as easily or often. This in itself is a major bonus to soaker hoses!
  • Quick and productive growth – Regularly irrigating systematically with a soaker hose ensures you are giving even amounts of water to your plants. This will result in faster, more productive growth that isn’t hindered by water stress.
  • Healthy growth – Since water is absorbed directly at the soil level, the leaves of your plants won’t end up wet. This can prevent many mildew issues and other foliage diseases, like root and stem rot. Just like too much water on plants can be problematic, so too can too little. Proper amounts of moisture will also keep your plants from wilting.
  • Save time and effort – Using a soaker hose system is easy and saves time. No longer will you have to stand out in the sun for hours every day, spraying plants manually. Just set them up, turn on the spigot and watch them water.

Soaker hoses are a valuable, often overlooked tool for the home gardener. Check out how they can help maintain a healthy, lush, productive garden this year – we promise, once you try a soaker hose, you’ll never go back to the old way of watering!

What is the Best Soaker Hose of 2020?

The Swan Products Sprinkler Soaker Hose is the best soaker hose you can buy for the value it provides.

Once the weather starts warming up, plants need all of the water they can get. While sprinklers and complex irrigation systems are often the go-to for gardeners, I prefer something a bit gentler.

The best soaker hose can keep your plants looking healthy without wasting water. They’re simple to set up and use. Even still, the benefits they provide are immeasurable. Looking to invest in a soaker hose for your garden? Let’s take a look at some of the best options on the market.

Product Rating Price
Swan Products GIDS-2496287 Element Sprinkler Soaker Hose 1 Check Price
Rocky Mountain Goods Soaker Hose 2 Check Price
Gilmour 100049288 Flat Weeper Soaker Hose 3 Check Price
Dramm 17020 ColorStorm Premium Soaker Garden Hose 4 Check Price
Melnor 65062-AMZ Flat Soaker 2 Hose 5 Check Price

Table of Contents

What is a Soaker Hose?

At first glance, soaker hoses look like any average garden hose. However, they operate very differently. The most significant difference is the tiny pores that allow water to seep through the walls of the hose.

It’s important to remember that soaker hoses are not the same thing as drip irrigation systems. Drip systems are comprised of rigid tubes with smaller emitter tubes. While they operate on the same basic principles, soaker hoses are considered to be more effective and more eco-friendly.

That’s because soaker hoses use low water pressure. As the water seeps out of the pores, it’s able to soak into the soil directly over the roots of your plants. This results in less waste through evaporation.

What are the Different Types of Soaker Hoses?

There are two different kinds of soaker hoses on the market. The most common you’ll find are round hoses. Usually made out of rubber or vinyl, round hoses offer great durability and versatile use. The pores are located around the entire circumference of the hose, allowing you to hydrate soil from all angles.

The alternative to round hoses is flat hoses, which are often made out of a nylon-coated mesh. The biggest benefit that flat soaker hoses have to offer is control.

With flat hoses, the pores are located on one side. You can direct the water right into the ground where you want it. Plus, the flat shape prevents the hose from rolling out of place.

Both options can be buried under mulch. It’s not recommended that you cover them with soil, as they can become clogged or kinked.

Do You Need a Soaker Hose?

Ultimately, soaker hoses are all about convenience and efficiency. They make it easier to keep the soil moist regardless of sun exposure and temperature. As a result, your plants are able to stay healthy.

Despite having a continual supply of water, the risks of root rot are minimized. The slow flow ensures that the soil isn’t waterlogged. The water is delivered directly to the root where it can be used. The foliage stays dry as well.

From a water conservation standpoint, soaker hoses are very advantageous. Because the water is directed into the soil where it can be used, there’s less evaporation and overspray. All in all, soaker hoses a worthy investment that can improve the overall health of your plants.

How to Choose the Best Soaker Hose

Not all soaker hoses are made the same. To ensure that your purchase is right for your needs, keep the following considerations in mind.

Length

Soaker hoses come in a range of lengths to fit gardens of all shapes and sizes. It’s recommended that you measure your garden area and choose a length based on where you want to lay the hose.

Like standard hoses, you can easily connect multiple soaker models to achieve your desired length. However, the length of your finished setup should not exceed 100 feet from a single water source.

Pore Size

Choosing the right pore size is paramount. The goal is to have a product that can keep the soil moist enough to hydrate the plant roots. Hoses with enlarged holes may produce too much water.

Depending on the pressure you’re dealing with, these hoses may also spray the water rather than releasing it slowly.

On the other side of the spectrum, you should also avoid perforations that are too small. The inadequate flow will result in poor hydration.

As a good rule of thumb, soaker hoses should produce thick beads of water. When the water supply is turned on, the hose should slowly produce these beads without projecting them outward. If you can physically see those water droplets forming, the pore size is just right.

Flexibility

There are a couple of factors that can contribute to the flexibility of the hose. The first is the material it’s made out of. Rubber hoses are known to be pliable and easy to work with. However, thick plastic hoses can be stiff and stubborn.

The second factor is the shape of the hose. Flat hoses, while relatively flexible, aren’t capable of making tight turns. Remember, the pores are on the bottom of the hose. The limitations that come with this placement make it difficult to create curves.

Take a look at your garden and consider how you want to arrange the hose. If you plan on running the hose in rows, you’ll need a flexible hose that you can easily stake around corners.

Weather Protection

Chances are, your new soaker hose is going to be exposed to a bevy of weather conditions. To ensure that your investment lasts, choose a hose that’s protected from the elements.

Some materials, such as rubber, are great for colder temperatures. Rubber can expand and flex. You can leave the hose out well past the summer season before you have to worry about freeze damage. With that said, rubber is also prone to UV damage from constant sun exposure.

Many manufacturers apply UV coatings to their products. These options perform well in direct sunlight. Keep your environment in mind and look out for weather protection features to keep your soaker hose in good condition.

Durability

In addition to getting protection from Mother Nature, your hoses should be safe from accidents. Soaker hoses are susceptible to punctures and tears. These issues could affect the efficiency of your hose and change the flow rate.

Many manufacturers add some type of reinforcement to keep the hose in good shape. Additional fibers or a layer of steel mesh are the most common reinforcement methods. Keep in mind that an extra layer of protection will affect the hose’s flexibility.

Pressure Rating

Soaker hoses don’t need much pressure to operate efficiently. In fact, it’s recommended that you keep water pressure to around 10 PSI. At this rating, the water will seep out slowly rather than spraying all over the place.

While you could manually adjust the pressure at the source, many soaker hoses come with built-in regulators. The regulator drops the incoming pressure significantly to keep things running smoothly.

Precautions When Using a Soaker Hose

Due to the way that soaker hoses operate, there is one major safety precaution that you need to consider before you start setting things up. You need to invest in a backflow device. Some hoses already have one of these built into the connection fittings. You may also have a faucet that has this feature. If not, you’ll have to purchase the device separately.

Essentially, backflow preventers ensure that contaminated water doesn’t enter your home’s water supply. The low water flow that’s produced by soaker hoses makes it easy for dirt and chemicals to move through the line. If there’s a sudden drop in water pressure, the hose can act as a vacuum and suck up water back to its source.

This can affect your drinking water. If your plants are fertilized, the risks of contamination are significant. Backflow prevention devices only let water flow in one direction. Many municipalities require these gadgets for any type of irrigation system to keep the local water system clean and contaminant-free.

How to Use a Soaker Hose

Using your soaker hose involves a bit of careful planning. You want to arrange the hose in a way that moistens the soil effectively. Of course, the amount of water you’ll need to get the job done will depend entirely on your plants and soil.

First, you need to prepare the hose. Remove the end cap and run water through the hose to get rid of any debris. Then, replace the cap and attach your backflow prevention device. If you’re using a pressure regulator, attach that as well before you connect the soaker hose.

Then, you must place the line through your garden. Run the hose in rows. If you have standard soil, you can place the rows about 12 to 18 inches apart. For sandy soil, keep the distance between18 and 24 inches.

Also, consider the spacing of the rows to your plants. Annuals thrive when the hose is about 4 inches from the stem. For larger plants that have an expansive root system, you can place the hose up to 24 inches away.

Plan for slopes ahead of time. Soaker hoses do best on level ground. However, you can get around shallow hills and dips by running across the elevation change.

Once everything is set up, you can turn on the water and let the hose hydrate your soil for about 40 minutes. Then, check to see how deep the water penetrates. Ideally, you want the water to reach about half of the root zone. Adjust your watering time accordingly.

You can use the soaker hose once or twice a week depending on your plant’s needs. To retain moisture after watering, cover the hose in 2 inches of mulch.

Maintaining a Soaker Hose

Proper maintenance is crucial if you want your soaker hose to last. Luckily, caring for your investment is relatively easy. The most important task you’ll need to do is flushing.

Flushing your hose gets rid of built-up grime and removes any bugs that may have ventured into the perforations. To do this, simply attach the end cap and let the water run for up to 15 minutes. This should be done once a month to keep the hose in good shape.

As the hose is flushing out, perform a visual inspection. Look out for any clogs that are preventing water from flowing through. You can fix these clogs by using a small pin to remove the debris.

Unlike standard garden hoses, you don’t have to take soaker models in for the winter season. Any remaining water in the hose will seep out if the hose contracts during a freeze. As long as the line is covered in mulch, it should be safe.

With that being said, you should always disconnect the fittings and detach it from your spigot. Frozen fittings could lead to serious plumbing issues. So, make sure to disconnect everything before the first freeze of the year.

Swan Products GIDS-2496287 Element Sprinkler Soaker Hose

  • Easy to use and handle
  • This products adds a great value
  • This product is manufactured in United states

Last update on 2020-02-01 // Source: Amazon Affiliates

The Element host is a unique option that serves two purposes. Not only is it a soaker hose, but you can also use it as a misting sprinkler. The hose is flat and features 6 perforations per foot.

When the host is faced down, it continually hydrates the soil. Face it upward to shoot water into the air and treat a larger surface area. There’s even a printed stripe to help you spot the holes easier.

This hose is made out of 65 percent recycled rubber. As a result, it’s quite flexible. Though, it does have some light reinforcement to add protection against accidental tears. It’s also completely free of lead, so you can water your plants safely without having to worry about potential poisoning of your harvest.

With a length of 50 feet, there’s more than enough hose to cover small to medium-sized gardens. Overall, this hose is a great option for those who need a multi-purpose hose. It performs well as a traditional soaker. While it’s not the most powerful sprinkling system out there, it does a decent job of covering large areas as well.

Pros Cons
  • Soaker hose and misting sprinkler
  • 6 perforations per foot
  • Made out of 65 percent recycled rubber
  • Free of lead
  • 50 feet length
  • Not powerful

Check Price

Rocky Mountain Goods Soaker Hose

  • Heavy duty recycled rubber soaker hose is made to last
  • Add length when needed – Quick attach reinforced fittings are included and make for easy connect of additional soaker hoses
  • Works great for gardens and flower beds

Last update on 2020-02-01 // Source: Amazon Affiliates

This soaker hose from Rocky Mountain Radar is simple yet effective. It takes on a traditional design. While it may not have all the extras as the previous hose, it does its job very well.

The entire hose is made out of recycled rubber. Thus, it’s flexible and easy to manage. If you need to run multiple rows or go around tight corners, the rubber makes it easy to accomplish.

Rather than adopting a flat shape, this hose is cylindrical. It’s reasonably thick and features pores at every angle for optimal hydration.

When it comes to flow rate, this hose manages to strike a good balance. There isn’t a pressure regulator built-in. However, elements within the spigot fitting help to prevent the water from shooting into the air.

The only downside of this soaker hose is that pressure issues can come up towards the end of the unit. Water droplets tend to be smaller and more sporadic at the end of the hose, which could be a problem if you’re looking to achieve even moisture across your garden.

Pros Cons
  • Made from recycled rubber
  • Flexible and easy to manage
  • Cylindrical shape
  • Pores for optimal hydration
  • Prevents water from shooting into the air
  • Low pressure at end of the hose

Check Price

Gilmour 100049288 Flat Weeper Soaker Hose

  • Snake through rows of new seedlings or under mature plantings for efficient, deep watering season after season
  • Create an easy DIY watering system by burying the hose under mulch. Hook it up to a timer and enjoy healthy, vibrant plants without all the watering work
  • Made of vinyl

Last update on 2020-02-01 // Source: Amazon Affiliates

If you’re looking for a lightweight hose that’s easy to stow away when not in use, this option from Gilmour is for you. It’s not made of rubber-like many of the other soaker hoses on the market. Instead, it has a PVC core that collapses.

When it’s not filled with water, the hose lies flat. This makes coiling and storing the hose a breeze. Covering the PVC is a unique fabric shell.

The fabric features a tight and protective weave. The material helps to prevent debris and bugs from getting into the hose. Despite its protection, water doesn’t have any issues making its way through.

The combination of the vinyl and fabric doesn’t affect the hose’s flexibility at all. In fact, it’s very easy to snake the hose through plants. You can almost create a right-angle turn.

The only caveat of that flexibility is that the hose is very easy to kink up. If the fabric covering folds in a certain way, water is cut off from the rest of the hose.

Pros Cons
  • Lightweight
  • Made with PVC
  • Easy to store
  • Material prevents debris entering into the hose
  • Flexible
  • Easy to kink up and cut off water

Check Price

Dramm 17020 ColorStorm Premium Soaker Garden Hose

  • Soaker hose
  • Conveniently water gardens and beds
  • Evenly waters from beginning to end

Last update on 2020-02-01 // Source: Amazon Affiliates

For the most part, the Dramm soaker hose is a well-built piece of garden equipment. It’s made from recycled material that feels very durable. According to Dramm, the hose is resistant to abrasive damage and kinks. Those are nice touches that can make using the hose hassle-free.

On one end of the hose, you’ll find a nickel-plated brass fitting. It’s noticeably tough and matches the quality you would find in a traditional garden hose. Unfortunately, the same high standards did not apply to the end cap.

It’s made of lower-quality materials and is prone to bursting, which can render the entire hose useless. Luckily, Dramm does offer a lifetime guarantee on this hose.

In terms of performance, the soaker hose is capable of serving the needs of most. It’s a round hose that features appropriately sized pores all around. While there isn’t any pressure regulator added to the line, the small pore size manages the flow of water very well.

Pros Cons
  • Well-built and durable
  • Made from recycled material
  • Abrasion resistant
  • Nickel-plated brass fitting
  • Lifetime guarantee
  • Can feel a bit stiff

Check Price

Sale Melnor 65062-AMZ Flat Soaker 2 Hose

  • Extremely flexible and versatile – it gets water right where you want it! You can place it above ground or under a thin layer of soil or mulch. The porous hose delivers soft and gentle watering with no waste. It’s perfect for raised beds and vegetables!
  • Easy connection – included rust-resistant end cap allows multiple hoses to be connected together
  • Flattens for easy storage – the compact design dripper only takes up About 0. 05 ft³

Last update on 2020-02-01 // Source: Amazon Affiliates

The Melnor soaker hose is designed to be very flexible. It’s composed of two layers. Inside, there’s a thinner plastic layer filled with small perforations. Over that, you’ll find a fabric cover.

All in all, the hose is light and easy to work with. It collapses flat for storage and can be placed under a thin layer of mulch if you want to hide it away.

With all that said, the hose’s extreme flexibility makes it a magnet for kinks. Even small turns and curves result in a noticeable fold that cuts off the water supply to the ends of the hose.

Even if you run it in a straight line, the pressure isn’t that consistent. The last quarter or so of the 75-foot hose gets less water than the portion that’s closest to the supply.

The good news is that the fittings are well-built. The hose uses standard threads made out of durable plastic to prevent rusting. Melnor even throws in an extra pair of rubber seals, just in case.

Pros Cons
  • Flexible
  • Composed of two layers
  • Lightweight and easy to use
  • Collapses for storage
  • 75-foot length
  • Prone to kinks
  • Pressure is not consistent

Check Price

Our recommendation

With a solid soaker hose, the days of overwatering your plants are over. These unique tools can make a drastic difference in your garden’s overall health. Whether you’re growing flowers or looking to have a bountiful harvest of vegetables, soaker hoses can help your seedlings reach their full potential.

The best soaker hose that’s currently on the market is the Element sprinkler soaker hose from Swan Products. Extra features aside, the hose performs well across the board.

The flat design allows you to direct the water where you want it to go, giving you ultimate control. Plus, you can use it to water your lawn. The fact that it does double-duty as a misting sprinkler is enough to set it apart from the competition.

When it comes to construction quality, none of the other hoses can compare. When you look at other flat hoses, such as the options from Gilmour or Melnor, the Swan is more reliable. It has a reinforced body that’s protected from kinks and physical damage. Furthermore, it has a UV coating to keep sun damage at bay.

Ultimately, the Swan Products hose ticks off all the boxes while bringing something new to the table that others simply can’t.

How To Use Soaker Hoses in a Vegetable Garden

Whether you’re a subsistence gardener or you raise a vegetable garden for fun and to add variety to your summer menu, chances are you will need to find an effective way to deliver water to your plants. You can hand water, water with sprinklers, water with soaker hoses or use complicated drip systems. If you’re like many gardeners, you love your garden, and you put a lot of time and energy into it to keep weeds at bay and your plants thriving. There are other things that still require your attention and money. For most gardeners, the basic soaker hose is a perfect compromise between the time required to hand water, the mess and inaccuracy of overhead watering, and the fussiness and expense of emitter-based drip systems.

How Do I Set Up a Soaker Hose System?

The first question about using soaker hoses is always: “How do I use a soaker hose in my garden?” Using a soaker hose watering system is simple. Most gardeners who use soaker hoses will lay them out along the rows of plants they wish to water and leave them in place for the growing season rather than disturb the system and the plants between watering. If you’re a fan of mulch gardening, you may cover your soaker hoses with mulch.

How Do I Run My Soaker Hoses Through the Garden?

A single soaker down the center of a narrow, raised bed, or between two fairly close rows of plants works very well. For larger, high-demand plants like indeterminate tomatoes, you may wish to loop the soaker hose around the base of the plant for more even irrigation.

If you have a sizeable garden and use multiple soaker hoses, you can simply attach a regular garden hose to whichever hose you want to feed and move it to each soaker in turn, or you could choose to get a little fancier and install a manifold with an individual valve for each connection.

Do I Need Special Equipment To Use Soaker Hoses in My Garden?

Soaker hoses work best with a pressure of around 10 pounds per square inch, so your home system should provide more than enough pressure to service multiple soaker hoses at once. Some gardeners use an external pressure control while others simply turn back the main faucet to reduce the flow of water. If you purchase quality soaker hoses with restrictor washers, you won’t need to reduce your line pressure. Restrictor washers are simple disks found in the female end of the soaker hose. They feature a small hole which only allows a small quantity of water to enter the hose at any given time, naturally reducing the water pressure to the desired rate of flow.

How Long Do I Run My Soaker Hose?

Right after questions about setting up a soaker hose system, this is the next question that comes up: “How long do I leave the soaker hose on in my vegetable garden?” There are two different schools of thought on this one, but neither of them really answers the question the way you might expect. The short answer is that “your mileage may vary.” Let’s see what that really means in terms of how long you need to run a soaker hose in order to adequately water your vegetable garden.

Soaker Hose Watering in Inches

In theory, there are two ways to measure how much water your garden is receiving and whether it is adequate. The first is to know how much water your garden is receiving in inches. Generally, it is agreed that the average vegetable garden needs about one inch of water per week in the spring, and one and one-half to two inches in the summer.

In order to know how long you need to run your soaker hose in the garden based on the “watering in inches” method, you need to know two things: How long does it take my soaker hose to put out an inch of water? And how much rain has my area received?

Once you know your rainfall total, you can calculate how much water you need to add to get your desired weekly total. To know how long it will take you to distribute the additional water you need through your soaker hose, you can use a shallow vessel such as a tuna can placed under your soaker hose to time how long it takes to deliver an inch of water through the hose. That will allow you to figure out how much time it will take to apply the water you need using your soaker hose.

The Depth of Moisture Method of Soaker Hose Irrigation

This method works very well for many gardeners, especially those who practice deep bed intensive gardening methods. To test the depth of water, you will simply start watering and periodically dig a spade of dirt out to see how deep the water has soaked in. Most gardeners desire a depth of 8 to 12 inches with some variation for soil type. In most cases, you’ll be able to assume that the same depth will require a similar irrigation time so that you’ll know how long to let your soaker hose run.

Soaker Hose Design Help

Diagram S – A closed loop set up.

Steps to installing a soaker hose system
Tools & Materials

  • Plastic or metal stakes

  • MrSoakerhose (pre-measure the path of the hose where you are going to lay it) soaker hose is sold only in bulk, no fittings are attached/included.

  • Polytubing

  • Pressure Regulator is a MUST since soaker hose is designed to work at low pressure.

  • Filter to keep particles from clogging your soaker hose (minimum of 150 mesh).

  • Water timer (can be installed later)

  • Y connector with shutoff, splitters, fittings.

    Lay Out the Hose in Your Garden Beds Position soaker hoses throughout the garden near each plant within 6 to 12 inches of the base. On slopes, run across the slope, not up and down. In perennial beds, keep hoses about 18 inches (sandy soils) to 24 inches (clay soil) apart. For annual plants space the runs closer, 12-18 inches apart, to make sure water reaches their shallow roots. Stake the hose into place with stakes wherever it needs it to secure the hose’s position.

    Hide the Hose After testing the soaker hose to see that it waters the area well, you can cover it with 2 inches (or more) of mulch, such as wood chips, bark, leaves, or compost, or even decorative rocks. The mulch keeps water from evaporating and helps spread the water flow. It also helps protect the hose from the sun. Have you ever felt the temperature of water that was just sitting in a hose out in the sun? It’s hot! Can be used above or below ground. Soaker hose IS NOT for lawn areas.

    Stakes Use to secure soaker hose

    Watering times Start out by running your soaker hose for about 40 minutes once a week, or 20 minutes twice a week for sandy soils and annual plants and gardens that have shallower roots. The goal is to wet the soil in the plant�s root zone. You can tell if the plant is getting enough water by digging a hole with a trowel to see if the root zone is wet (wait a while after watering before you check, so the water has time to soak in). Leaves may droop a little on hot days but if they stay droopy after the hottest part of the day, they�re probably too dry. Drooping can also be a sign of over watering but again, check the soil first! Once you�ve got the timing figured out, attach and set a timer to the system. This will make it possible for the watering system to work even when you are on vacation.

    Trees: Using a soaker hose encircle the tree with the hose beginning at the drip line. Add a circle of soaker hose every 2′ inward from the drip line throughout the root zone. Try to water the soil areas directly beneath the foliage and shaded by the tree. Do not water beyond the drip-line and do not water closer than 3 feet to the trunk base on established trees.

    Hanging planters, pots and window boxes: Large, hard to move barrels, pots and window boxes will do better with a slow running soaker hose. Water regularly as the dry season goes on. Hanging plants may require watering more frequently as the wind and sun dry them out. During exceptionally hot weather (80’s or 90’s) hanging baskets may need watering daily, or even twice daily if the basket has limited soil area. Small 1/4″ soaker hose in a loop works great for these small areas. By using a 1/4″ in-line valve you can regulate the flow to your planter for maximum effectiveness. Like the 1/2″ soaker, ALWAYS use a regulator.

    Maintaining Your Soaker Hose System Once or twice a year, unscrew the end caps and flush out any accumulated sediment. Flushing it at the start of the year will help you check for leaks, and ensure that it�s not plugged. Make sure everyone working in the garden knows the soaker is there under the mulch, so they don�t accidentally damage it. Most cuts or nicks can be repaired with couplings. Soaker Hose is UV stabilized – won’t freeze in the cold or crack in the sun.

If you’re not using soaker hoses in your garden, now’s the time to start. It’s a highly efficient way to water, so while you may spend a little on a soaker hose and fittings at the onset, you will recoup those costs in time and money saved on watering your garden. Studies show that well-designed drip irrigation systems use at least 30% — and in some cases 50% — less water than other methods of watering such as sprinkling.

Rain Bird Drip Irrigation Gardener’s Drip Kit Rain Bird amazon.com $30.29

A drip irrigation system can be as simple as a soaker hose or two snaked through your garden, or as complex as a network of tubes and other hardware. Either way, the principal is the same: A soaker hose or a perforated tube delivers water directly to the root zone of a plant where it seeps slowly into the soil one drop at a time, dripping at just the rate that soil can absorb and hold moisture.

Soaker hoses’ slow, steady drip ensures that almost no water is lost to surface runoff or evaporation — all of the water goes to your plants. It also means very few nutrients leach down beyond the reach of plant roots. Furthermore, since soaker hoses deliver water directly to the plants you want to grow, less is wasted on weeds. The soil surface between the plants also remains drier, which discourages weed seeds from sprouting.

For busy gardeners, the main benefit of using a drip irrigation system is the savings of both time and effort. Drip irrigation systems eliminate the need to drag around hoses and sprinklers. You place your soaker hoses once, and leave them be. For drip irrigation systems that use a timer, gardeners need only spend a few seconds to turn the system on; the timer automatically turns it off.

Drip irrigation systems are good for plants, too. Plants watered with soaker hoses grow more quickly and are more productive, because they have all the water they need and their growth isn’t slowed by water stress. (This is especially true when drip irrigation is used in conjunction with mulch.) Also, plants watered by drip irrigation don’t end up with wet foliage from sprinkler spray, which can help prevent some foliage diseases.

Where to Install Soaker Hoses

Patrick Montero

The easiest way to experiment with drip irrigation is to buy a couple of soaker hoses, which ooze water over their entire length. You can snake soaker hoses through garden beds of rose and perennials, among shrubs, or in the vegetable garden, where the hoses can run parallel to rows of crops.

Pin them in place with wire garden pins and cover with mulch, not soil. This reduces moisture loss from evaporation — just remember to check where the hose lies before you dig. When it’s time to water, connect them to the nearest faucet with a garden hose. Take out the hoses at the end of the growing season.

Tip: To get the kinks out of a soaker hose that has been stored tightly coiled, unroll the hose and let the sun warm it for an hour or more.

How to Reduce Water Pressure

Patrick Montero

The plastic pressure reducer or pressure regulator inside the hose coupling protects the hose from splitting under high water pressure. If your soaker hose doesn’t have a pressure regulator, you can purchase one separately, or simply keep the faucet turned low. Water should slowly seep, not squirt, from the pores.

How to Space Soaker Hoses

Patrick Montero

As you wind a soaker hose through a flowerbed, make an extra loop around plants with the greatest moisture needs, such as hydrangeas or cannas, but keep the hose a few inches from plant stems. Otherwise, space the lengths of hose about 24 inches apart over clay or loamy soils, or about 12 inches apart if the soil is sandy.

When several soaker hoses are connected end to end, most of the water will seep from the hose closest to the faucet; less water will reach the far end. Avoid uneven distribution of water by setting up separate watering zones with no more than 100 feet of soaker hose each. Use quick-connect couplings or Y valves to switch the water from zone to zone.

Tip: Leave the hose running until water has penetrated 6 to 12 inches into the ground (less for shallow-rooted annuals, more for shrubs and perennials). Once you know how long it takes, automate the process by adding a timer at the faucet.

When to Use Other Irrigation Systems

FeodorKorolevsky/Getty

Soaker hoses are great for row crops such as carrots and beans, but for watering trees and shrubs or an expansive container garden, you’ll probably want to set up a more sophisticated drip irrigation system. Topography is also a consideration: If your garden is hilly, you’ll probably need to use emitters that compensate for pressure changes in the line.

Keep in mind that plants can become “addicted” to drip irrigation, because roots will concentrate in the area where the water is available. It’s important to spread water uniformly throughout the irrigated area for uniform root growth. For example, if you’re irrigating trees and shrubs, place emitters on two or more sides of each plant. For the same reason, it’s best to provide long, slow waterings. If you turn it on for frequent, short sessions, water won’t spread far in the soil, and consequently the roots will form a tight, ball-like mass around the emitters.

The Best Drip Irrigation Kits for Beginners

A low-risk way to try drip irrigation is with a starter kit. Most companies that sell drip irrigation systems also offer kits for both small and large gardens with the essential components. Keep in mind that some kits don’t include pressure regulators, timers, backflow preventers, and line filters.

Gardener’s Supply Snip-n-Drip Soaker Hose System SHOP NOW

This highly customizable kit includes a 25-foot PVC garden hose, a 50-foot recycled rubber soaker hose, faucet adapter, a quick-connect coupler, and plastic connectors, and an end cap. Just use scissors to cut the soaker hose to fit garden beds, and then cut the garden hose to fit between beds where you don’t need water. Snap the fittings in place and you’re ready to water. This kit can easily be added onto, so you can expand your system over time. Optional add-ons (sold separately) include angle connectors for connecting drip systems to raised beds, 3-way-connectors for creating watering zones.

Square Foot Garden Irrigation Kit SHOP NOW

A drip irrigation kit tailor-made for square-foot gardening in raised beds.

Rain Bird Drip Irrigation Gardener’s Drip Kit SHOP NOW

A more expansive kit for more expansive gardens.

Jenni:

Just enough. That’s how much you should water with a soaker hose, drip system or by hand.

Both an excess and a lack of water cause problems so the best thing to do is get your hands dirty, or just a couple of fingers, by poking them in the soil. Develop the habit of testing your soil before watering and you’ll successfully water the right amount, which again is just enough.

When you test the soil determine whether or not it’s moist a few inches beneath the surface. If so, leave it alone. Test it again the next day and see if anything has changed. If the soil feels dry, go ahead and water. Leave the soaker hose running for 45-60 minutes. It’s best to water deep and infrequently. When you water shallow and often you train the roots to be lazy. With shallow watering the roots stay near the surface instead of growing deep in the ground where additional moisture may be found as well as nutrients/minerals. Deep roots will provide better support to the plant as well as help the plant withstand stress from hot/cold temperatures.

After you’ve watered you’ll need to pay attention to how many days it takes for the soil to dry out again. Once it’s dry, then it’s okay to water. In the end you will know how often to water even when weather conditions change. The frequency will change with rain or lack of it as well as temperature fluctuations.

A few other tips: Try to water before 10am or after 7pm during the summer to prevent evaporation. Make yourself aware of any city watering restrictions. Make sure you always water the soil and not the plants, paying special attention to avoid watering the leaves. Once a month, water your garden with diluted seaweed to stimulate root development. Give your plants a foliar feeding with compost tea to give them a boost of energy and strength to deal with heat stress and/or pests.

Shannon:

I am going to have to defer to Jenni on this one since I don’t currently use a soaker hose. Because of the way my garden is set up, I just use a sprinkler once a week (there are some pretty tight water restrictions here in Austin) and then hand water with a sprayer the rest of the week. When it is below 90 degrees I water every other day, and in the summer I pretty much have to water every day. Unless, of course, if it rains!

Have a gardening question? Well, we’d love to answer your question! Simply and submit your question and we’ll do our best to provide a helpful response.

Top 10 Tips for the Best Soaker Hose Application

Maintain a lush garden without the high cost of watering it. Don’t use those sprinklers on vegetable or flower gardens because most of that water is lost to evaporation. Your answer is in the form of a soaker hose. These basic hoses have tiny perforations that allow water to seep through and into the ground. To get the most out of your system, try these top 10 tips for the best soaker hose setup.

Tip 1: Start With Level Ground
Your soaker hose system design functions best when the ground is level. The science behind these hoses is based on a uniform distribution of water within the conduit. Any slope to the ground forces the water to one part of the hose. This scenario defeats the purpose of the hose’s design. That one area receives most of the water while the remaining soil stays largely dry. Reserve the soaker hoses for flat areas instead of rocky or hilly applications.

Takeaway 1: A flat layout gives optimal performance in a soaker watering system.
Tip 2: Skip the Sprinkler Connection

The pressure moving through your sprinkler system is too great for soaker hoses. They might break down the rubber and plastic materials. Connect your hose to a standard faucet. They’re typically found against the home’s wall just outside of your garden. Some homes have more than one so you have some versatility.

You’re welcome to arrange the hose near the sprinkler system’s coverage area if it’s not supporting every corner of the planted spaces. You’ll enhance the landscape’s growth with this strategy.

Takeaway 2: A soaker hose does not work to connect with a traditional inground watering system. It can, however, supplement areas not sufficiently watered by in-ground systems.

Tip 3. Keep the End Cap On
If you’re unfamiliar with a DIY garden watering system, you might be tempted to take off the end cap as you’re setting up the hoses. Removing the end cap presumably helps you see the water flowing through the conduit. However, it’s a better strategy to leave the end cap on. The water remains trapped in the hose so it can seep into the ground. This is the action you want to see in your garden.

Takeaway 3: Removing the end cap to see if water will flow all the way through the hose is not a good test to see if the soaker hose is leaking properly.

Tip 4. Fill the Hose Up Entirely
The concept behind soaker hoses is forced liquid through tiny holes. If the hose doesn’t have enough water pressure pressing against the walls, the moisture cannot seep out. Start your soaker hose with its entire length full of water. It should have a standard cylindrical appearance when it’s full. It shouldn’t look distended or flat on any section. Watch the moisture seep through the walls so that you know the system is working as intended.

Takeaway 4. Initially, the soaker hose will not weep until the full length of hose is full of water.

Tip 5. Keep the Restrictor Disk Inserted in the Hose Coupling at Water Source
Your soaker hose isn’t just a conduit with weep holes. Each length comes with a restrictor disk that’s designed to be used at the water source. This internal part controls the water entering the hose, which leads to a controlled soaking in the garden. Most soaker hose placement designs, however, call for multiple lengths connected together. Don’t forget to remove the disk from the other hoses. You only require one disk at the faucet end for pressure-control purposes.

Takeaway 5. Make sure the blue restrictor disk is inserted in the female coupling at the water source. You should remove the restrictor disk from subsequent hoses when connected together.

Tip 6. Use One Water Source for Each 150-Length

There’s a limit to your soaker-hose design because of basic science. Ideally, stop connecting lines when you reach the 150-foot mark. Hoses longer than this measurement won’t properly soak the area. The conduit loses water pressure as the length stretches farther away from the water source. Systems require multiple water sources if you need to cover more than a 150-foot length. Choose your design carefully so that you can optimize the water flowing into your yard.

Takeaway 6. Do not use more than 150 feet of soaker hoses from one water source.

Tip 7. Avoid High Water Pressure

An ill-conceived strategy to avoid the 150-foot limit is simply adding a higher water pressure to the system. Don’t force more water into the soaker hose because the results won’t be beneficial. The hose expands like a balloon, which causes the holes to widen as well. You end up with a deluge of water into the soil while damaging the hose. It’s possible for the hose to crack or break entirely too.

Takeaway 7. Higher water pressure does NOT push more water into the hose and make the hose weep more. Increasing water flow from the faucet creates the risk of bursting the hose at the connection.

Tip 8. Keep the Water Source High

An understandable mistake involves the use of hoses where they run uphill on a property. Consider the role that gravity plays in your setup. Water will naturally flow downhill. Use this concept to guide your installation. Choose a water source that’s higher than the hose’s position on a flat, ground surface. As the water leaves the spigot, gravity pulls it downward and into the hose’s length. Controlled seepage is the result of this design choice.

Takeaway 8. The water source should be at a higher elevation than the soaker hose. Let gravity work for you, not against you.

Tip 9. Determine Suitable Timing

Because of the slow process of adding water to your garden, soaking times can be deceptive. For a standard five-eighths-of-an-inch hose, you need 200 minutes to saturate the garden with one inch of water. Most yards require about two inches of water each week. Ideally, watch your property’s water use and gauge the soaking times as necessary. Soil factors, landscaping obstacles and other features play a part in your watering strategies.

Takeaway 9. How long you should water with a soaker hose depends on specific conditions. For best results, monitor and adjust accordingly based on variations in soil type, plants being watered, temperature, etc.

Tip 10. Test It Out

Always test the soaker hose system before you finalize the yard’s appearance. Don’t outright bury the hose in the soil. Cover it with mulch so the water can still seep through with ease. Coil the hose around certain plants, such as bushes, so you’re able to saturate enough soil for successful root absorption.

Takeaway 10. Lay out your design and test before you cover with mulch or dirt to make sure water is reaching everything you want it to water.

Knowing how to set up a soaker hose system gives you the power to conserve water while improving your property’s appearance. Inspect your hoses on a regular basis to make sure they’re operating as designed. Watch those flowers and fruits grow exponentially with ample moisture supporting their roots.

How long do YOU run your soaker hose? (Raised garden bed)

Soaker hoses are an abomination. I assume your area is small. Hand watering is better but three are several methods.
http://www.durgan.org/URL/?DDBQE 8 July 2012 Effective Watering.
Get the moisture to the roots of the plants! Not by guesswork, but by utilizing an effective delivery system. The watering magic wand and a bit of effort delivers the water where it can be utilized by the plant roots. The soil is hard packed clay between all the plants, yet the plants are thriving. The plant root growing area might be compared to a large pot. The pot being the hard packed clay outside the root growing area. All my plants are watered when large enough using the WATER MAGIC WAND. When the plants are small a watering can is used or a pail. Why would any thinking person water the ground between the plants where it does no earthy good? Even some of the large trees get water, since during this dry spell some are shedding leaves, a sure sign of they need water. Drip, soaker hose, and aerial spraying are almost insane as far as being effective for the plants. Plants so not need continuous watering, they like a deluge then a rest period.
Mulch helps retain moisture for loner periods, but it alone is not adequate if there is insufficient rainfall. The watering times are staggered, hence the effort is not onerous. The results are spectacular with little wastage of water.

Leave a Reply

Your email address will not be published. Required fields are marked *