How to plant evergreens?

diy potting soil

Garden Soil: will give your mix density to support plants. Ideally it should be heated or solarized first.

Homemade Compost: used to replace all or part of the peat, perlite or vermiculite with excellent moisture retention and nutrients. Compost can be 20 to 30 percent of your mix. Compost needs to reach 160 to 180 degrees F in the composting process to be ideal for use in a potting mix. You may want to screen or sift out any larger pieces that may need to break down further, leaving you with fairly consistent particle sizes for your mix. Compost is full of nutrients, eliminating or reducing the need for many nutrients. Wait for your plants to “tell” you if they need more nutrition when using compost in your mix.

Purchased Compost: If you do not have homemade compost available, purchased compost will do fine. And you won’t have to worry about heating it.

Perlite: gives your mix a light texture and good drainage with a neutral pH. This sterile additive will hold a ton of water. I like perlite instead of sand for light weight mixes. But you should were a dust mask when using perlit, it contains

Sand: make sure it is a coarse builder sand to improve drainage to your mix. A fine sand will fill up and clog air pockets that are important for roots. If you are using the right coarse grade, it will not look like sand as we usually picture it, it will look almost like tiny pebbles.

Vermiculite: light particles that increase porosity and retain moisture. Use a medium for starting seeds, coarse for potting gardens. This volcanic mineral will also add calcium and magnesium, important for your plants. Vermilculite also has some capacity to hold and make minerals available to your plants. I also prefer vermiculite to sand, especially since it provides some insulation in cold regions. Can sometimes be a tad alkaline, which can balance the acidity of peat moss or pine bark if you use them.

Sphagnum Peat Moss: adds lightweight bulk and holds water well. Peat breaks down very slowly. To balance the pH when using peat moss add a little lime. When peat gets dry, it is difficult to moisten, you may see water run right over the container edge or around the soil ball and out of the container. Water slowly until the entire soil mass moistens. Or avoid the problem by using compost instead.

Coir Fiber: from coconut husk processing, it looks like sphagnum peat moss but breaks down even more slowly and will provide more nutrients for your plants.

Pine Bark: should be composted first and will give your mix a light texture and helps air and water move freely through the mix. Nitrogen will likely need to be added as the pine bark will use nitrogen from the soil as it continues to break down. Pine bark is best used when planting perennials or shrubs in your containers.

Worm Castings: has recently become easily available, or use vermicast. Castings are not only an excellent plant food source but will also retain moisture and hold loads of nutrients for your plants.

Blood Meal: nitrogen

Bone Meal: phosphorus and may contain calcium

Kelp Meal: low amounts of quick release nitrogen, may be high in salt

Alfalfa Meal: nitrogen and phosphorous, also encourages microbia activity

Cottonseed Meal: nitrogen, slightly acidic

Feather Meal: slow release nitrogen.

Fish Meal/Emulsion: fast acting nitrogen, aids in root growth, health, disease resistance and transplant shock

Seawood/Kelp: aids in root growth, health, disease resistance and transplant shock

Greensand: iron, magnesium and other trace elements.

Rock Minerals: such as NatraMin, aids health and reproduction

Rock Phosphate: slow release phosphates

Limestone: commonly called calcium carbonate or dolomite limestone, this is used to help neutralize pH when acidic additives are used such as sphagnum peat moss or pine bark.

You can also add slow release plant foods and soil conditioners depending on what you plan to grow. Remember that some perennials prefer little nutrition, some annuals prefer a lot. You may want to add plant foods or even some of the nutritional additives to individual containers as necessary.

Evergreen Trees: Everything You Ever Wanted to Know

Why Evergreens? For starters, Evergreen Trees have foliage year-round. The term evergreen means that trees will keep growing leaves as other leaves fall off. For that reason, most people think of Pines and Christmas Trees when they think of the word Evergreen.However, any tree that keeps its green foliage year-round, enduring the cold weather and dry seasons or hot, humid temperatures, is an Evergreen.

And needless to say, there are a ton of options! But our guide explains how to choose the rightEvergreen Treesfor your yard.

What are the Best Evergreen Trees for Privacy?

First, we recommend that you determine thepurposeof trees for your landscape. Will your evergreen trees be used for windbreaks, screening and privacy, or will they be decorative trees? Evergreens come in many different shapes, sizes, colors and leaf types. Knowing the purpose of these trees will help you determine which evergreens will work best for your yard.

Prior to buying evergreens, it’s also important to understand their chances of survival in your area. Knowledge of your growing zone can help you decide on which evergreen will work for you. Some trees and shrubs are hardier than others, so it is important to check the zone rating on trees you are interested in. Also, it’sbest to know what type of soil type the evergreen prefers.

Some plants can tolerate drier soil types while others need moist soil. Knowing the pH balance of your soil prior to purchasing a tree can be helpful. Certain trees preferacidic soil, while others need more alkaline soil.

  • Alkaline soils are drier soil types, so it’s best to buy drought tolerant trees

  • Acidic soils hold moisture better – most evergreens like acidic soil.

How Do You Plant Evergreen Trees?

Most evergreens thrive in full to partial sunlight. Some trees have a higher tolerance than others for factors like poor soil drainage, salt spray from snow plows, extreme weather conditions, and pest or insects. Most evergreens don’t require a lot of maintenance as far as upkeep. Some trees require minor pruning and annual fertilization. There are a few varieties that willdrop needles andseeds at certain times of the year. Cypress and Spruce Trees are examples of evergreens that shed their foliage yearly. If a messy yard is a concern, you may want to avoid those varieties.

How Fast Do Evergreen Trees Grow?

Furthermore, you should consider how tall you want the trees to be in your yard. Make sure to anticipate the size of the trees once they mature. A tree’s growth rate will also have a bearing on your choices. Are you okay with a slow-growing tree, or do you need something that will establish height quickly? If shade or privacy screening isimportant, you may want to choose a fast-growing tree. Many evergreen trees can reach mature heights of 20 to 60 feet, whereas some dwarf varieties of evergreens only reach heights of 4 to 6 feet.

In order to choose your evergreen trees wisely, keep in mind the actual size of your yard and the allotted space for these trees. It is important to fit trees to their surroundings. Some evergreens will not look as attractive if they outgrow the area you’ve chosen for them. When a tree grows too large for its space, it may require regular pruning or removal.

We recommend using small to medium-sized varieties for smaller homes and yards. You can place smaller trees near yourhome and taller trees farther out in your yard.

Cypress Trees

Cypress Trees willmake excellent additions to your landscape. They can be recognized by their pyramidal shaped small, rounded, woody cones, shoots and scale like leaves. Their foliage can range from yellowish green to green or a grayish color. They can reach mature heights of up to 60 feet. Cypress trees can be grown in zones 4 to 11. In order to grow, they require full to partial sunlight.

Planting:We recommend planting your cypress trees 10 to 12 feet apart from each other, unless you are planting a hedge. When you are planting a hedge, they only need to be5 to 6 feet apart.Water your trees regularly and keep the soil moist at all times but not soggy. You can fertilize your trees if you choose, but they do not require fertilization. If you choose to fertilize, use a balanced tree and shrub fertilizer.

Cypress Diseases

Cercospora Needle Blight: A fungus caused by cercospora sequoia, most common on Leyland Cypresses. However, it can affect other species of cypresses like Thujas, and Junipers. This causes browning of the needles on the lower part of the tree next to the stem. The infection eventually spreads upward and outward until only the needles on the tips of the branches are green. You can recognize this disease by the green pustules on the surface of the needles. This will spread mostly during the spring and summer by the wind. You can treat these trees by spraying them with a copper-based fungicide. Continue spraying the tree until new growth pushes out.

Seiridium Canker:This canker is one of the most damaging diseases to Cypress Trees. The canker can form on the stem or the branches, causing them to die back. They appear as brown or purple patches on the bark with resin coming out of them. Eventually the twigs and branches will turn bright red and then brown before dying. There are no chemicals that can be used to treat this at the time. You can avoid spreading the disease by keeping the tree from getting wounded and pruning off any infected branches or twigs. Also, sterilize your pruning tools in bleach prior to prevent rusting.

Botryosphaeria Canker:Similar to the Seiridium Canker, this fungus can cause reddish brown twigs and branches. The cankers that develop on the tree from this disease don’t have resin coming out of them. These cankers will not harm the trunk but will kill off the branches. The Botryosphaeria will attack trees that are under a lot of stress. In order to prevent this disease from attacking your trees, it is best to maintain good health for your tree. Mulching, and providing a good amount of water to your trees during extreme heat and drought will help.

Spruce Trees

Spruces are pyramidal trees than can be known for their stylish cone-like form and whorled branches. The needles on these trees are attached to the branches in a spiral like formation. Spruce trees can range from 5 feet tall for dwarf trees, and to heights of 60+ feet for larger trees. These trees are usually grown as ‘Christmas Trees,’ especially the Blue and Norway varieties. They require full to partial sun in order to thrive.

Planting:Plant spruce trees 20 to 25 feet apart. Make sure that you water your trees regularly in order to maintain moist soil. These evergreens do not need much fertilizer just plenty of sunshine and water. However, if you choose to fertilize these trees you can use a tablespoon of balanced tree fertilizer and sprinkle it on top of the ground around each tree.

Spruce Tree Diseases

Spruce Needle Rust:This infection can cause your needles to become discolored, while the bugs remain green and alive. You will notice the needles will drop of the next year. This can eventually cause the whole tree to turn a tan-pinkish color. This infection is not treatable. Depending on how serious the infection, the tree may not survive.

Spruce Spider Mites:These insects can cause the needles and branchesto look likethey’re dried up. If you use a magnifying glass you will notice mites, and eggs on the twigs. There will also be webs on the twigs. You can use a miticide to treat your tree. You can also treat yourtree in June and July to prevent mites from getting on your trees in general.

Common Needle Cast:Older infected needles turn a tan color as a result of this fungus. Normally the tree naturallysheds mostof its needles. However, the infection causes them to fall off prematurely. When you take closer look at the needles, you will notice black fruiting bodies on the bottom of the needles. To prevent this, you can apply a single application of fungicide at the beginning of summer.

Cryptomeria Trees

These trees are known for their handsome cone-like shape and rich, reddish brown bark which often peels off in strips. These large trees can reach heights of 35 to 45 feet. Theyalso have needle-like leaves that form spirally scales on their branches. These trees grow best in zones 5 to 9, and require full to partial sunlight.

Popular Cryptomeria Trees: Growing Zones Mature Height/Width
•Radican Cryptomeria Zones 5-9 30-40 ft./15-20 ft.

Planting:The best way to plant Cryptomeria trees is to space them about 15 to 20 feet apart from each other for the larger varieties. For the dwarf varieties, we recommend spacing them 2 to 6 feet apart from each other.

Cryptomeria Diseases

It is uncommon for these trees to have issues with diseases or pests. However, it’s always a good idea to keep an eye on your trees, and look for any signs of health issues.

Thuja Trees

Thujas are commonly known as arborvitaes and make wonderful landscape trees. The textured reddish-brown wood on these evergreens is soft and aromatic. And the shoots on these trees come out on a single plane and are flat, with long, needle-like leaves. The leaves are arranged in crisscrossed pairs in four rows along the branches. Certain species of the Thuja have thicker foliage and larger cones. Thujas are very hardy and adapt to a variety of soil types and weather conditions. These arborvitaes can range from heights of 10 feet for dwarf trees to 40 feet for the giants.

Thuja trees are extensively used for hedges and landscape. Their slender shape makes them a popular evergreen for landscaping.They also make excellent privacy screens and wind breaks.

Planting:We recommend planting your Thuja trees 15 to 20 feet apart. If you have a small yard the trees can be planted 8 to 10 feet apart to form a hedge. Even though these trees are drought tolerant it’s best to try and keep the soil moist around your trees. Keep in mind the tree’s growth is slowed during periods of drought. Thujas do not generally need fertilizer. You can fertilize in the early spring and early fallEspoma Holly Tone or Rose Tone.

Thuja Diseases

Tip Blight:A fungus that attacks weak or damaged areas on the Thuja. The infected needles on the tree begin to die and then eventually spread to the branches. The color of the leaves also turns from green to yellow, and before dying, they turn brown. You can prevent this disease from spreading by pruning off infected parts and using a fungicide.

Leaf Blight:This fungus attacks the leaves on arborvitaes and can be recognized by the dark brown to black circles on new leaves during the spring. Eventually the leaves turn brown and by fall, all the leaves on the tree will drop off. You can prevent leaf blight with a copper spray application in the summer and early fall.

Juniper Blight:Commonly affects red cedar and juniper trees. However, this disease can also attack Thuja Trees. The disease causes the branches to die back. Dieback will start at the tips of the shoots on young trees. If this is not treated, the tree will eventually die. You can use fungicides containing copper and propiconzole.

Holly Trees

Hollies are evergreens that are best distinguished by their glossy foliage. The leaves are typically saw-toothed, or indented on the ends. Depending on the species some hollies are deciduous, and some push out flowers and or berries. The berries ripen in winter and provide a nice red color contrast to your landscape. However, the fruit is not edible and should not be ingested, though they are good food sources for wildlife.

Similar to Spruce Trees, Hollies have become associated with the Christmas season. Varieties like the Nellie Stevens and American Holly are used as ornamental parts of the landscape during the holidays. Hollies are relatively slow growing evergreens. Though they can reach heights of 15 to 25 feet depending on the variety.

Planting:Space your Holly Trees 5 to 25 feet apart, depending on the variety and the mature size of the plant. They like full to partial sun and moist well-drained acidic soil. You can use compost as fertilizer for these trees in the spring. It is recommended to spread it around the outer most branches, and then add 2 inches of mulch to help the tree retain moisture.

Holly Diseases

Canker:This disease causes sunken areas on the stems called cankers. These cause the trees to eventually die. In order to save the trees, it is recommended that you prune off any infected branches.

Tar Spot:Infection can occur during the spring when temperatures are moist and cool. It starts off as yellow spots on the leaves, and they eventually turn brown to black in color. As a result, the leaves either get holes or fall off. It is best to remove any infected leaves before the infection spreads throughout the tree.

Chlorosis:Another infection that can affect Hollies is Chlorosis, which is an iron deficiency and can lead to the disease. It causes light green to yellow leaves with dark green veins. It is best to reduce the pH levels in yoursoil or treat it with supplemental iron-fortified fertilizer.

Juniper Trees

Juniper trees are lush evergreens with scale or needle like leaves. These drought tolerant evergreens are also called cedars, though they are not actually cedar trees. These trees are species of the Juniperus in the Cupressacea family. Depending on the variety Juniper trees can average heights of 15 to 20 feet.

Juniper trees can be planted in almost anywhere, with one exception. We do not recommend planting Junipers in your yard if there are apple trees in your yard or nearby. Apple trees sometimes become infected with cedar-apple rust. This fungus easily can transfer onto juniper trees and cause severe damaged to the tree.

Planting:We recommend planting Junipers 3 to 6 feet apart depending on whether you’re planting a tree versus a shrub. Shrubs are okay to be planted 2 to 3 feet apart if you’re using them as a hedge. Water your Junipers deeply after planting, and then water them two times a week for a month following planting. After that only water once a week except during extreme heat temperatures or drought. You can fertilize yourJunipers once a year in the spring with a slow release fertilizer. Spread fertilizer around yourtree before watering the tree or before it rains.


Once you decide on your evergreen trees, it is also recommended that you plant them at least 10 to 15 feet from your home’s foundation and at least 5 feet from fencing, sidewalks, and patios. Keep in mind only short trees can be planted underneath utility lines. So, where should you plant your evergreen trees?

Property Lines

Evergreen trees are often used for screening near property lines. But it’s best not to put too many trees along your property line. This will help prevent overcrowding as the trees grow. A grouping of two evergreens is usually ideal in one or two key areas of your property line. This will still help you gain the privacy you seek.

Patios or Decks

Adding evergreen trees to this area can provide shade from the sun and privacy from your neighbors. We recommend placing the trees 5 to 7 feet from the deck or patio. Place the evergreen trees on the side of your patio or deck where you could use the most privacy.

Open Backyard Space

An open space in your backyard will give you the most opportunity when it comes to planting evergreen trees. The number of trees you plant here depends on the size of your yard. It is best to plant evergreen trees where you need privacy or shade. You may not want to plant an evergreen directly over a garden or area that needs direct sunlight.


It is not recommended to plant evergreen trees near a parkway. These trees make it difficult for cars to see while backing out of the driveway. It also makes it difficult to see the front of homes.

Open Front Yard Space

Your front yard is a good place to plant evergreen trees. Most front yards have room for at least two or three trees. It is suggested to place the trees randomly in the open space. Make sure to keep in mind the view of the areas around the home where flowers and bushes are growing. Your trees should be positioned a good 10 to 15 feet from the home.

Side Yard

Depending on the size of your lot, side yard spacing can also be an ideal spot for evergreen trees. Windbreaks and privacy screens can help frame your property. This can also help provide shade foryour home and keep it cool during the summer months.

When to Plant Evergreen Trees?

Depending on your local climate, both spring and fall can be ideal for planting evergreen trees. Planting evergreen trees during the spring gives their root systems time to develop during the growing season. However, if you reside in an area that experiences severe heat and dry weather, it may be best to wait untilfallto plant. Young evergreens are susceptible to heat and drought damage.

The benefit to planting in the fall is the roots of evergreen trees grow more aggressively than when planted during the spring. The soil conditions are more ideal due to the amount of moisture in the air. However, if you decide to plant during the fall it is best to do so prior to November. If your evergreen is planted too late, it could possibly suffer winter damage.

Can You Plant Trees, Shrubs or Evergreens in the Winter?

That warm feeling you get from planting a new tree or shrub might have you ready to add one to your yard in winter.
But just like there’s a right way to plant trees, there’s a right time to plant, too. In some cases, wintertime is right on target, but other times, planting in winter will hurt your tree in the long run.
Here’s how to tell if it’s OK to plant in winter or if you should wait for a more suitable season.

What You Need to Know About Planting Shrubs, Evergreens, and Bare Root Trees in Frosty, Winter Weather

Young plant roots need a warm and well-watered environment to establish themselves, which is why frosty soil and fresh new roots don’t mix. With frozen ground, tree roots can’t get the water they need to get off to a good start.
That being said, if you live in an area free of freezing winters, or your area’s having a seasonably warm winter, you might be able to plant in wintertime.

Are there any trees you can plant in winter?

The only trees you should totally avoid planting in winter are evergreens. Unlike deciduous trees and shrubs, evergreens hold on to their foliage in wintertime, and it’d be really hard for them to establish their roots and preserve their needles’ moisture levels with a limited water supply in winter.
Other tree types are usually fair game, but only if the ground isn’t frozen and won’t freeze for at least four to six weeks after planting.
That’s why if you live somewhere like Alabama, Georgia, Tennessee, or any place the ground doesn’t freeze, winter planting is not just OK, it’s encouraged! In these climates, planting in winter gives new trees the time they need to establish roots before hot, drought-like weather kicks in.
If you’re looking for a little more guidance, here’s a breakdown of the best time to plant trees based on where you live and what you’re planting. You can always check with your state or provincial extension service for planting recommendations as well.

How can I plant trees or shrubs in winter the right way?

As you’ve read a few times now, the key to setting a new tree up for success in winter is planting when the ground is cool but not frozen. Not sure how to gauge the ground temperature? Use a soil thermometer! Insert the thermometer down into the soil for a few days in a row. If the soil consistently measures 50° F or higher, it’s safe to plant your deciduous tree or shrub. But, if the soil test proves the ground is too cold, plan to plant during the upcoming spring or fall seasons instead.

What should I do after planting bare root trees or shrubs in winter?

Welcome your new plant with a moisture-conserving layer of mulch, and water the plant weekly all the way up until the ground freezes.

Proper Soil Mix For Evergreen Container Plants And Trees

Container gardening has become a very popular form of gardening in the past few years. It only stands to reason that people would want to plant evergreen trees and shrubs in pots as well. Using evergreen container plants is an excellent way to add winter interest to your container garden or to had formality and structure to your year round container garden.

One of the most crucial parts of growing evergreen container plants is the soil. Your evergreen tree pots need to be filled with soil that will not only meet the nutrient and water needs of your evergreen container plants, but provide stabilization for your container tree as well.

Soil Mix for Evergreen Plantings

The first thing to consider is the weight and size of your container. If your tree container is very heavy and very wide, than you probably do not have to worry too much about the possibility of the tree and the container falling over in the wind. In this case, using only a soilless mix is acceptable.

If the tree container is not heavy enough or wide enough, than the container tree stabilization is at risk. This can be combated in two different ways. One is to fill the bottom 1/3 of the pot with gravel or pebbles. This will help the container tree stabilization. Fill the rest of the container with a soilless mix.

Many times, some people recommend that topsoil be mixed in with soilless mix, but this would not be a wise idea due to the fact that evergreen container plants need excellent drainage in order to grow as it should. Topsoil in a container can become compacted and hard, even when mixed with other soils. The topsoil will eventually impede proper drainage. Evergreen tree pots that do not have good drainage can develop root rot and die.

In order to improve the drainage for your evergreen container plants, you may want to add grit or pumice to the soilless mix.

Also, make sure that you also add plenty of slow release fertilizer to your soilless mix for your evergreen container plants. This will help with making sure that your evergreen tree has plenty of nutrients to keep it growing well.

The addition of some mulch to the top of the soilless mix in the container will not only help retain appropriate levels of moisture, but the mulch will help to slightly acidify the soil as well, which most evergreens like.

Growing evergreen container plants and trees can be a fun and interesting addition to your container garden. With proper care, your evergreen trees will live happily in their containers for many years.

Leave a Reply

Your email address will not be published. Required fields are marked *