Do pepper plants need to be staked

How To Stake Pepper Plants

Although pepper plants are usually considered to be fairly sturdy plants, they have been known to break on occasion from the weight of developing fruit. Pepper plants have shallow root systems. When they are laden with heavy fruit, the branches will sometimes bend and break. For this reason, many people turn to pepper staking or other means of support. Let’s find out more about how to stake pepper plants.

How to Stake Pepper Plants

Staking pepper plants may not be a requirement for growing them in your garden, but it has its advantages. Not only does pepper staking help support plants, keeping them upright,

but pepper staking can also reduce sunscald on fruits and helps keep them off the ground, where they are susceptible to pests or rotting.

The best way to stake peppers is to drive a wooden or metal stake next to the plant or every 3 to 4 feet per row. Then, simply tie the main stem and branches of the plant loosely to the stake using torn sheets or pantyhose. Continue to add ties as needed while the plants are actively growing.

Even if you’re growing peppers in a container, you can still support pepper plants with stakes. For staking pepper plants in pots, drive the stake into the soil of the pot, or for more stability, place it in the ground next to the pot and tie it off.

Using Cages to Support Pepper Plants

Some people prefer to support pepper plants with cages rather than staking pepper plants. For this you can use wire tomato cages — store bought or homemade. Homemade pepper cages are constructed much the same as those used for growing and supporting tomato plants. For more information on building these supports, check out the following article: Tips for Building Tomato Cages.

There certain plants in your garden which naturally grow to a larger size. These plants will need extra support to keep their stems from breaking and the produce off the ground.

Plants which grow to two feet or taller are also automatically a good candidate for being staked. It will protect the plants from being beaten down by high winds and heavy rains.

Knowing this, it’s important to put a support in the ground for the plant when planting. A support will give the plant assistance to grow up against while it’s reaching maturity.

There are a few specifications to consider depending on what you’re staking.

Staking Options

When you realize you are planting a more substantial plant in your garden, you’ll need to choose which type of stake you’d like to use for their support. Here are your stake options:

1. Single Stake

If you are growing a small garden or a container garden, you may not need a large number of stakes in your garden.

Instead, you may only need to offer support to a couple of plants. If this is the case, you can choose to stake each plant individually.

When you do this, you should place a single support next to or around the plants. You could use items like:

  • Bamboo
  • Rebar
  • Tobacco sticks
  • Plastic Stakes
  • Tomato Cages
  • Chicken fencing
  • Nylon Netting

Any of these items should give your plant support as it works on producing its fruit.

2. Multiple Stake

If you are planting a larger garden, you could have numerous plants which are heavier. If you tried to stake each plant individually, you would have more time and materials invested in your garden.

This wouldn’t be budget-friendly or efficient. Therefore, you should go with a multiple stake idea.

You should place a stake at either end of the row of heavier plants. You’ll run a piece of twine at the top between two posts and another piece of twine at the bottom between the two posts.

From there, you’ll run a zig-zag pattern between the two pieces of twine from one post to the other. What this does is creates a woven design for the heavier plants to be able to grab onto and grow upwards.

Though it’s much more efficient for a large number of larger crops, you’ll need to plan your garden. This way, you’ll have all the heavy varieties placed together in the garden, which will make supporting them as a group much more manageable.

3. Tripod

Let’s say you want to plant a group of green beans in one area of your garden. Unless you grow bush beans, they’ll most likely climb.

This could be a mess if you don’t have a place for the beans to climb on to. In this case, it’s a good idea to use a tripod.

When I used my tripod for growing green beans, I found three large sticks and tied them together like a tripod or tee-pee design.

You will set the tripod in place and plant the green beans around the base of the tripod. As they grow, you should train them to climb the tripod. This will keep your harvest off the ground, organized, and make picking your green beans much easier.

Plants Which Should be Staked

We’ve discussed what staking a plant is and what options you have for staking your plants, but what plants should you intend on staking in your garden?

Well, there are quite a few:

  • Pole beans
  • Blackberries
  • Cucumbers
  • Tomatoes
  • Melons
  • Peas
  • Pumpkins
  • Peppers
  • Gourds

Melons and pumpkins, you’ll have to grow a smaller variety to stake them. The larger types will break most stakes, no matter how sturdy.

But if you grow the smaller varieties, they should stake nicely and make picking much more accessible. As well as keeping the harvest off the ground, and safe from rot.

The Guidelines for Staking Your Plants

There are certain things you should take into consideration when staking your plants. If you don’t match the right stake with the right plant, your plant could either not climb the stake well or break it.

Which is why it’s essential to have a plan before you begin throwing stakes up in your garden. Here is what you need to consider:

1. Sturdy is Your Friend

When you are choosing a stake to hold up your heavier garden plants, you’ll want something sturdy.

If not, your plants could still end up on the ground. Be sure to pick durable materials which won’t bend under pressure.

Keep in mind, when placing the stakes by your bigger plants, you’ll need to consider how large the plant is going to get.

Ask yourself if the stake will hold the plant at full maturity. If the answer is yes, you chose a good stake. If you’re questioning it, you should look for something different.

2. Stake When Planting

It’s important to stake your plants when planting them. If you try to stake your tomatoes after they’ve reached full size, you’ll have a problem.

Imagine trying to wrestle a large tomato plant into a tomato cage. It’s going to be difficult to do.

However, if you apply the tomato cage when you plant the seedling, it should slide right over, and the tomato will learn to grow upward with support.

3. Each Plant Variety Needs Different Support

I’m going to get a little personal here, but I want you to imagine staking your plant like this: look at your plants like women.

You have some women who are tall and slender. You have some women who are more full-figured. Regardless of their shape, every woman still has to pick undergarments for support.

Realize, you aren’t going to fit a full-figured woman into an A-cup undergarment. Likewise, most tall and slender women aren’t going to need a DD-cup.

Well, your plants are the same. Some plants are going to be slenderer (like a pole bean) and will want to wrap around a slender pole as they grow.

Other crops, like a tomato, are full-figured and need more substantial support like a cage or tobacco stick. Consider what you’re planting and the preference which will best suit the crop.

Also, consider if the plant will grow up the stake on its own or if it’ll need to be tied. All of these things matter when choosing the proper stake for each plant which requires staking in your garden.

4. Be Careful When You Stake the Plant

Be careful when you are staking your plant. Be sure to choose soft materials to tie the plant to the stake to not damage the plant itself.

It’s a good idea to choose twine or string to tie a plant. If you select something rougher, you could sever the stem of the plant and ruin the plant altogether.

Reflect on what you’re using to secure the plant to avoid any damage.

5. Specifications of the Stake

If you are choosing to stake a plant individually, it’s important to consider the plant in a mature state. Be sure the stake you’re choosing won’t end up being taller than the plant itself.

The stake should run out at 2/3 of the way up a mature plant. You will tie the plant to the stake at this point.

This is a good basic rule to keep in mind when choosing the stake for your full-figured plants, such as tomatoes or peppers.

6. What’s Your Limit?

Finally, you need to consider what your physical limitations are. You could choose to run green beans around an arbor.

Well, are you going to be able to reach to pick them? If you are choosing to cage your tomatoes, are the holes big enough for your arms to fit through to pick them?

You want your plants to be supported, but it must be functional too. If the plants have support, but you can’t get to your harvest, you’ve done this in vain. Keep your physical limitations in mind when choosing a stake.

Stake Selections

There are many different stakes to choose from. I wanted to cover the basic varieties with you, to help you make an informed decision about what would work best in your garden. Here are the typical choices for a trellis:

1. Trellis

via gardentherapy.ca

When planting a more substantial plant, you could choose to put a wooden trellis behind the plant during planting. This trellis will give you a sturdy place to tie the plant to and offer a good bit of support as the plant reaches maturity.

2. Arbor

via threemanproducts.com

I love growing my half-runner green beans on an arbor. Not only is it pretty, but it makes picking them a ton easier. If you have plants which will climb, it’s important to give them a functional place to climb to because this will keep them from sprawling all over the ground.

via The Horticult

I discussed building a tripod with you earlier. It’s a great, compact idea to grow green beans or small melon varieties. Tripods are durable and can handle a decent amount of weight.

4. Cattle Panels

Cattle panels are another great idea for supporting plants. We use this in our garden to support larger rows of green beans and tomatoes. They can handle the weight and will last year after year.

5. Tomato Cages

via getbusygardening.com

Tomato cages are a great option in a smaller garden with only a handful of tomatoes. It gets expensive to cage them all if you’re growing 50 tomato plants. But for smaller yards, it’s a great and durable option.

6. Single Stakes

via porch.com

Single stakes consist of a robust vertical object planted next to the plant. You should tie the plant to the object for support.

7. Stake by the Row

via youtube.com (Jim Thomas)

We’ve already discussed how to stake your plants by the row above in the multiple stake section. However, if you are planning on staking a whole row of vegetables which are heavy or climb, this is a reliable option.

Well, you now know what staking is, how to go about it, and different options for staking your plants.

However, I want to hear from you. What plants do you stake in your garden and what stakes do you use?

We love hearing from you. Leave us your thoughts in the comment section below.

Was this article helpful?

×

How can we improve it?

×

We appreciate your helpul feedback!

Your answer will be used to improve our content. The more feedback you give us, the better our pages can be.

Follow us on social media:

Facebook Pinterest

1771shares

  • Pin
  • Share
  • Tweet


Tomato cages seem to be a garden staple, and most gardeners have a cage or two on hand when the planting season begins. Tomato cages are a wonderful way to lend your tomato plants some support, and in turn can result in big and beautiful produce results. But did you know you can use tomato cages to grow other vegetables too? Take a look below at 5 vegetables you can grow using tomato cages that will also help you result in bigger and better produce. Take a look!

5 Vegetables You can Grow Using Tomato Cages

1. Peas
Peas are quite delicate, and so keeping them out of the soil and adequately supported is important. A tomato cage is the perfect solution. Place your tomato cage in the ground and secure it with a stake if you wish. Plant your seeds around the base of the cage. As the seeds sprout, you can gently train them to wrap around the supports of the cage and grow upward.

2. Cucumbers
Keep your cucumbers supported when you plant them alongside a tomato cage. Plant your seeds or your seedlings at the base of the tomato cage and as they grow, train them to wrap around the support by using your fingers to wrap and guide them. As the vine becomes heavier with produce, the cage will provide the tender vine support and keep the cucumbers out of the mud.

3. Squash and Zucchini
Like cucumbers, squash and zucchini can become heavy and add stress to the vine they grow on. Plant your squash and zucchini at the base of a tomato cage so they have support as they continue to grow in size and weight.

4. Miniature Pepper Varieties
There are many varieties of miniature peppers that will benefit from the support of a tomato cage. Plant your pepper plant in the very center of the cage and as it grows, the branches will have some support to rest on. The cage will also protect the plant from wind and even critters.

5. Strawberries and Raspberries
Don’t be afraid to use tomato cages to give your strawberry plants some support. Strawberry bushes can become rather large and a cage will help them really climb and flourish. Raspberry plants are another fruit that will enjoy the support of a cage, as their branches can become long and spindle like.

So grab a tomato cage or two and see how you can give your garden plants a little more support!

More Vegetable Gardening Tips

Tips for Growing Heirloom Tomatoes

Tips for Growing Gourmet Lettuces

Tips for Growing Pepper Plants

Secrets of Growing Summer Squash

10 Tips for Growing Larger Onions

5 Tips for Growing Celery

1771shares

  • Pin
  • Share
  • Tweet

Plant Support Cages – Tomato Cages

About Tomato Cage

Tomato cage is refer to round tomato cage which fully welding of heavy steel wires. It have the similar function with tomato tower, they provide all-round support for tomatoes, peas, cucumbers, zucchini, pepper and other fast growing vines & climbing plants.

Set tomato cages in your vegetable garden to keep them upright but less tied needed. Lattice-shaped column support can prevent fruits fall to the ground and reduce the second fruits caused by pests and disease. In addition, we can easily wrap the plastic cloth to the cages to create a simple greenhouse in winter or use it upside down for potted tomatoes if you want.

Tomato Cage Holding Fully Grown Tomato & Other Fructuous Plants

Feature

  • All-round support & arrangement for vine plants.
  • No need too much tying and training the vines.
  • Effective for maintain soil moisture.
  • Prevent cracking of the tomatoes & blossom end rot.
  • Reduce fruits damaged by sunburn, pets & disease.
  • Powder or PVC coated is anti-rust & ECO friendly.
  • Easy assembly & stacked, reusable.

Specification

Available Size

Table 1: Specification of Standard Tomato Cage

Item No. Height (inch) Top Ring Diameter (inch) Legs No. Rings No.
TC-01 55 18 4 4
TC-02 55 18 4 5
TC-03 54 16 4 4
TC-04 44 15 4 5
TC-05 44 15 4 4
TC-06 42 16 4 4
TC-07 42 12 4 4
TC-08 35 13 4 3

Tomato cages with rainbow colors to brighten your garden

Application

Tomato cage is one of the favorite ways for both gardening and potted plant support uses and keep a fragile harvest healthy yet flawless.

Round tomato cages are great for supporting fructuous and vining plants, such as tomatoes, hot peppers, peas, cucumbers, squash & zucchini, strawberries and paspberry, etc.

Tomato cage for zucchini fruits

Colorful tomato cage for potted tomatoes

Tomato cage for Hallowmas decoration

Tomato cage for garden young tomatoes

Tomato cage for gardening young plants.

Tomato cage ideas for festival decor

Round tomato cage for tomato plants

Round tomato cage for cuke plant

Tomato cage christmas tree

The Ultimate Tomato Cage in 5 Simple Steps

Of all the plants I grow in my edible garden, I have to say, my favorite are tomatoes! But, I don’t love the constant challenge of trying to keep them supported as they get really tall and wild. Yes, I’ve tried just about everything, but nothing worked well enough and at the same time, looked good enough in the garden for my taste…until now. Meet the ultimate tomato cage!

My ah-ha moment came as I was looking for more uses for those incredibly versatile livestock panels. I use them all around the garden, for supporting vining crops like cucumbers and peas, keeping my goats from eating some of my plants and one of my favorite uses, setting them on top of the beds at planting time for a handy grid template.

One of my favorite uses of these versatile panels is for my planting templates.

So why not use them for supporting tomatoes too? They meet all 7 of my criteria for what it takes to be considered the ultimate tomato cage: sturdy, tall enough, wide enough, rust resistant, attractive, storable, and long lasting.

You get livestock panels at the farm and tractor supply stores. Each one is 16 feet long and just over 4 feet wide. They’re made of galvanized metal and super sturdy.

Although I’m sure I didn’t invent this method for supporting tomatoes, I’ve never seen it in use, so my design is just what evolved through trial and error and settling on the ideal size for me. These panels are large enough to adapt to almost any size you prefer.

In my case, I get one complete cage at the height and width I like, with some pieces left over that I can use elsewhere in the garden. That way, the entire panel gets used with no waste. While you might consider the cost of a livestock panel at $20 a bit expensive for a single tomato cage, considering that these will last for years and with all the usable excess pieces, I think it’s a very good deal.

You just need two things to make these cages. One livestock panel for each cage (select the panel style that has a grid pattern approximately 6 inches square). You also need a pair of bolt cutters. My pair cost about $22 at Home Depot and well worth it. I tried a smaller pair but found they made my the palms of my hands sore after a short while of cutting. For the small difference in price and a one-time purchase, the larger size is well worth it.

Here are the steps on how I make the Ultimate Tomato Cage:

1. Place one full livestock panel on a flat surface. A driveway works well. Using a complete panel, count across the width so you have six complete squares and cut away the rest, all the way down the length of the panel.

Large bolt cutters and a flat surface make for quick work.

2. With the width of the long panel now reduced to 6 squares, I count down from one end nine squares, and cut all the way across, just above the horizontal piece at the bottom of this ninth square.

With the width of the original panel reduced to the desired size, now it’s time to cut for the desired height.

I prefer the bottom of this panel to have long vertical pieces that can be driven extra deep into the soil to serve as the anchoring stakes. If you choose this extra deep option, then cut away the horizontal pieces one level up at the 8th square also (the equivalent of two squares deep) as shown below.

Cut away the horizontal pieces, between the vertical pieces. This leaves long spikes to anchor each panel in the soil.

3. I then repeat step 2, starting from the other end of the original panel and count down nine squares. Once you cut across this piece, you now have three remaining pieces. The middle piece is now a nice sized panel with many versatile uses in and around the garden.

The two remaining pieces are what will make up your cage support.

4. Place one of the sections under a piece of straight lumber at least as long as the panel so that three squares are showing against the straight edge of the lumber. I like to have the panel facing up, so the long vertical rib is resting against the edge of the wood edge. This serves as a good guide and support as you bend up the panel from the outside edge towards you until you get a 90-degree angle.

The edge of a board serves as a good anchor for leverage and a straight guide for bending the panel towards you.

Then simply repeat this process for the other panel.

5. Stand the panels, so the lose spike ends are facing up. Take a second to straighten each one so when they are set in place in the soil, they all go in evenly.

Taking a few seconds to straighten the ends will make inserting them into the soil much easier.

Now it’s simply a matter of inserting them in the garden bed around each plant so that when both panels are installed, they form a square cage with the plant centered in the middle.

With straight spikes as the anchors, both panels should match up nearly perfectly.

A final but optional step to make it tidy is to secure each piece together with small cable ties. I use 4-inch ties, one at the top, one in the middle and one towards the bottom of each seam. This holds the panels firmly together and gives added stability and a seamless, solid look.

The tomato plants adapt beautifully while growing into their new homes.

That’s all there is to it. These cages are super sturdy, tall enough and just wide enough so as not to crowd the plant but still leave ample room for other cages in the bed. However, if you prefer even a taller or wider cage, a single panel in its original size allows for both.

At the end of the season, cut away the cable ties, separate the panels and stack them in a neat pile until the next time, and for many years after that.

So what do you think? Do you like? How would you improve upon this? I would love to put all the brainpower out there to work. I’m anxious to hear your thoughts!

Links & Resources

Episode 003: Growing Epic Tomatoes with Craig LeHoullier

Episode 005: What’s Wrong With My Tomato? Mid-Season Care With Craig LeHoullier

joegardener Blog: When is the Best Time to Pick a Tomato?

joegardener Video Blog: How to Top Tomatoes – What to do When Tomato Plants Get Too Tall

joegardener Video Blog: Sunscald-What Happens when Tomatoes are Overexposed

Growing a Greener World® Blog: Meet the Ultimate Tomato Cage Support

Spring is finally here and you know what that means…it’s time to start thinking about your veggie garden. I get so excited when the weather begins to warm up because I know that working in my veggie garden is coming. I love growing my own foods. Not only is it satisfying, it is a much healthier way to feed my family. So with that in mind, I thought that I would help you to grow a healthier and more sturdy garden. What that means is that I have found 15 DIY plant supports and cages that will help you to keep your garden plants supported while they grow those amazing veggies for you this summer.

These are all so easy to make and many of them can be created from repurposed or upcycled materials. There is simply nothing better for me than turning trash into treasure, which is why I really love repurposing so much. From tomato cages that you can make from reclaimed wood to a wonderful trellis that is made from old bicycle rims, you are definitely going to find a great DIY plant support for whatever plants you have in your garden this year. And, speaking of gardens, have you seen my list of 10 homemade insecticides? These will keep your garden pest free naturally.

These plant supports can be used for all of your plants, from tomatoes and beans to peas, cucumbers and even squash and pumpkins. If you have a plant that needs to be supported while it grows, you are going to find the perfect DIY plant support and you can make most of these in just a few minutes. Go ahead and get those supplies ready – we’re going to grow beautiful gardens this year and we’ll use our DIY plant supports to keep those lovely veggies coming all summer long! And, be sure that you take a look at these 25 DIY garden markers to keep those plants labeled and organized.

Table of Contents

1. DIY Folding Ladder Tomato Cages

These folding tomato cages are super easy to make and will perfectly support your tomatoes as they begin growing. You can build these with scrap wood if you have any on hand and they go up pretty quickly. Plus, they are foldable so when you are not using them in the garden, they are easy to store and take up very little space.

Tutorial: motherearthnews

2. $4 DIY Plant Supports

You can build these plant supports for less than $4 each and if you are using them for beans or other vining plants, you could use one support for each couple of plants in your garden, so you may not need many. These are great for tomatoes and only take a few minutes to put together. You make them with bamboo stakes, which are really cheap and if you happen to have cane growing in your backyard, you can use those, too which would make these free to make.

Tutorial: theelliotthomestead

3. DIY Bike Wheel Dome Plant Support

There are so many projects to repurpose old tires, but not many that actually let you use the rims of those tires. This dome shaped plant support uses old bicycle rims and it is really easy to put up. It’s also super unique and perfect for any vining plants that you have in your garden, including cucumbers and beans. And, you just have to zip tie the rims together to create it.

Tutorial: instructables

4. Cheap And Easy DIY Potted Branch Trellis

So, if you have a couple of large planting pots and a few branches in your yard, you can create these lovely potted branch trellises that are perfect for vining plants like cucumbers, peas and beans. This one doesn’t even take that much work to put it together and if you have the branches and planters on hand, it’s a free DIY plant support project.

Tutorial: thisoldhouse

5. Super Sturdy DIY Tomato Cage

If you are growing heirloom tomatoes, and if you have ever grown them before, then you know that you need something really sturdy to support those plants as your tomatoes begin to grow. Heirloom tomatoes get so big that they need additional support to keep them from toppling your plants over. This sturdy DIY tomato cage is made with cattle panels so you know it is going to give your plants the support that they need. And, it’s a pretty easy DIY project, too.

Tutorial: rodalesorganiclife

6. DIY Stake And Wire Plant Support

This combination of wooden stakes and chicken wire is perfect for keeping your tomato plants secure as your tomatoes grow. And since you are using wooden stakes at the beginning of your rows, this is also a great way to DIY your own garden markers. Just carve or write in whatever type of tomatoes are in that particular row. The wooden stakes and wire give your plants the perfect support while they are growing.

Tutorial: oldworldgardenfarms

7. DIY Entire Row Tomato Cage

This DIY plant support gives you sturdiness for all of the tomato plants in one row. You only need one cage per row and all of the plants can grow up the support at the same time. This would also be great for beans or peas. It is a pretty simple DIY plant support cage to make and you just need a few supplies, like galvanized welded wire panels and rebar for support.

Tutorial: mosaicgardens

8. Easy $10 Obelisk Trellis

These cheap and easy to make trellises are not only supportive for your plants, but they are also really attractive in the garden. Paint these colorful hues to really make your garden noticeable. They are so simple to put together and each one only costs about $10 to make, even less if you happen to have some scrap wood on hand. These are perfect for any vining plants like your beans and peas.

Tutorial: mommadanddaboyz

9. Repurposed Pallet Plant Trellis

This plant trellis is perfect for pumpkins, squash and other vining plants and it is really easy to make from a couple of old pallets. If you have a stash of pallets and you have been waiting for the perfect pallet repurposing projects, this is definitely one to consider. It will only take you a few minutes to make one of these and if you have enough pallets on hand, you can use them to support all of your garden plants that need it.

Tutorial: onehundreddollarsamonth

10. Easy DIY Stake And Twine Plant Cage

This tomato cage is made from stakes and twine and it only takes a few minutes to put together. If you have a few small wooden stakes on hand, this one is really cheap to build and it perfectly supports tomatoes and all sorts of other garden veggie plants. Even if you have to buy the stakes, this is still a really inexpensive DIY plant support project.

Tutorial: myhomeideas

11. DIY Bamboo And Twine Towers

These bamboo teepee styled towers are really easy to set up and you don’t need anything to make them but some bamboo stakes and rope or twine. You could also do these with branches if you have a few in the yard. This would be a great project for upcycling twigs and branches from the yard and these teepees are perfect for supporting tomato plants as they grow.

Tutorial: thepaintedhinge

12. Cute Umbrella Styled Teepee

This umbrella styled teepee will support all sorts of vining plants like your tomatoes, beans and peas, or you could even use it for squash and zucchini. It is made with wooden stakes and it has such a decorative look. If you really want it to decorate your garden, add some finials to the tops.

13. Simple DIY Willow Teepee Support

If you have a willow tree, you can use branches and twigs from that tree to make this teepee styled tomato plant support. This one could also work with beans and other vining plants. It’s pretty easy to make and you can do the entire thing with your willow twigs and branches or you could use rope or twine to tie all of the supporting branches together.

Tutorial: bhg

14. Cheap Wooden Tomato Cage

This tomato cage is made completely from wood and you can use scrap wood if you have any on hand. These are really easy to make and this is a cheap plant support project even if you have to buy the wood to build it. It offers perfect support for tomatoes and you could use it for your beans and cucumbers, too. Just start the vines up the cage when they begin growing.

Tutorial: ellaclaireinspired

15. Super Easy PVC Pipe Tomato Cage

PVC pipe is not terribly expensive and you may have some on hand – I always have a few pieces in the garage for DIY projects. This easy to make DIY tomato cage is crafted from PVC pipe and it perfectly supports those plants as your tomatoes begin to grow. This is even a good one for heavier tomatoes like heirloom varieties. And, it only takes a few minutes to put together. This is a great one to add to your list of PVC pipe organizing and storage projects.

Tutorial: idreamofeden

The most exciting season of the year is almost here – Spring! Time for everything to awaken and begin to grow again in the plant and animal kingdoms. Garden season is just around the corner and the hungry pests will soon follow. Use these tips to get your garden off to a good start this spring and a strong finish with plenty of produce.

Garden Location

Most garden plants (and flowers) will require at least six hours of direct sunlight each day. Select a location and observe it for 24 hours to ensure it will receive that much sunlight. take into consideration the nearby buildings which cast shadows and nearby trees which will leaf out when spring arrives. Structures and trees often put plants in the shade and provide shelter for plant-eating pests.

Soil Preparation

After selecting the right garden location, prepare the soil so it will be able to feed the plants throughout the growing season.

Apply plenty of compost or well rotted cow manure to the garden soil. Plow the soil, then cover the top of the garden spot with six inches of the chosen organic matter and thoroughly work it into the soil. Allow soil to rest for at least one week before planting seeds or plants so the soil can settle and nutrients disperse throughout the soil.

Planting Time

Plant desired crops into prepared soil by sowing seeds or setting out plants. Once the plants have reached 10-15 cms in height, add 5 cms of organic mulch around the plants. The mulch will help retain soil moisture, keep soil cool during the heat of summer, prevent weed growth and supply nutrients to the soil as it slowly decomposes.

Plant Protection

After all the hard work you put into starting a garden in the spring, the last thing you want is for pests to destroy the plants, produce and/or flowers. The best way to protect plants is with a quality netting. Lightweight netting will allow the sunlight and rain water to pass through to the plants, but keep small and large pests out.

Lightweight, connecting frames can easily be installed over the top of any garden to support the protective netting. Frames can be joined together with PVC connectors (20mm, 25mm, 32mm, 40mm & 50mm) to create any shape or height needed to protect garden plants. Netting is easy to roll back so plants can be tended too and produce harvested. A frame and netting are sturdy enough to be used for several years.

Pictures above are of my garden ready for spring – have a look at our website at our customer photos page for more ideas for your next PVC project. We also have free plans and videos to help you with your next PVC project- Rob Klever Cages

27th Aug 2016 Robert – Klever Cages

Leave a Reply

Your email address will not be published. Required fields are marked *